Yesterday I took something ugly and made it look pretty. The goal was to take the free afternoon and see how many logs I can do. Managed to get 3 done, with two good size cants about 12x12 and a 16x16 while one log held a surprise (hidden rot in center) so that one had to be whittled down. Along with a selection of 1x boards. One was particularly nasty and took a while to get it to the point where I could pass the mill over it. In the end it produced a 16x61 cant with a little bit of wane. Then I trimmed it to 12-1/4 x 14-1/2 to that it could sit on the pallet at the same height as the other large 12-1/4 x 12-1/4 cant I made earlier.