The Beg for Manuals Thread

[Germanoak]

I need a parts.manual for a 288xp
Please help

Done!

 

[Germanoak]

I need a parts.manual for a 288xp
Please help

http://www.husqvarna.com/us/support/download-manuals/
Public Husqvarna Link

 

[Germanoak]

anyone have the service manual for an 056AV Magnum II?

Done

 

[Tuplin86]

Hello, I have been gifted a 048 that is in great condition. I will be using it with my Granberg mini mill. I have given it a good going over, next on the list will be case gasket and seals. I was hoping to find the repair manual for this saw. it is a stihl 048 AV. thanks guys, new to the site, tones of great info! [email protected]

 

[Germanoak]

Hello, I have been gifted a 048 that is in great condition. I will be using it with my Granberg mini mill. I have given it a good going over, next on the list will be case gasket and seals. I was hoping to find the repair manual for this saw. it is a stihl 048 AV. thanks guys, new to the site, tones of great info! [email protected]

Done!

 

[huskyslinger]

hello all! finally found all my parts needed for a dolmar 121si that was given to me, but now I am begging for a repair manual. you all have ben a great help thank you

 

[Jwvm]

Check your Inbox.

Thank you!!

 

[ray benson]

hello all! finally found all my parts needed for a dolmar 121si that was given to me, but now I am begging for a repair manual. you all have ben a great help thank you

Couldn't find any info on a 121si, so check your inbox for 120si manual.

 

[jeff taswelder]

Hi I need a workshop manual for a SOLO 680 please

 

[bplust]

Anyone got a 111s Jonsereds IPL?

Thanks in advance!

Bryan

 

[Germanoak]

Anyone got a 111s Jonsereds IPL?

Thanks in advance!

Bryan

Done!

 

[jeff taswelder]

Hi I need a workshop manual for a SOLO 680 please

Thank you for the manual Ray,

 

[drf255]

Looking for an 036 manual. Pretty please.

 

[drf255]

Found this:



I think I may be OK. The gasket I cut won't cover the entire exhaust port, but it will seal if sandwiched between the plate and muffler.

Either way, I'm waiting on that Devcon Aluminum putty before I can finish the project.


Sent from my iPad using Tapatalk

 

[ray benson]

Looking for an 036 manual. Pretty please.

Check your inbox

 

[Augiezuki]

Picked up a 032-AV electronic quick stop on the side of the rode. No Bar or Chain and missing the airfilter and airfilter/carb cover.

I'm begging for a shop manual.

Any advice on refurbishing this engine would be great.

 

[Germanoak]

Picked up a 032-AV electronic quick stop on the side of the rode. No Bar or Chain and missing the airfilter and airfilter/carb cover.

I'm begging for a shop manual.

Any advice on refurbishing this engine would be great.

Done!

 

[shades2914]

i need ipl for 385 xp please and thanks

 

[Germanoak]

i need ipl for 385 xp please and thanks

http://www.husqvarna.com/us/support/download-manuals/

 

[gopackgo]

Anyone have a repair manual for the Stihl 017?

I have the instruction manual from Stihl but hoping for a repair manual also.