The made in north america Old Magnesium Swap Meet.

Advertise with us
Wesspur
Treestuff
Rugged made
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Eccentric
Eccentric

Eccentric

Mister Wizard
Joined
Jan 21, 2007
Messages
14,224
Location
Northwestern Wyoming
67L36Driver said:
Looking for the plastic fuel inlet strainer cover that has the hose barb feature.

Some P.O. sawed off the one on the Pioneer RA and just stuck a length of plastic straw in the hole.


I got stuff.
Click to expand...

Carl I probably have an extra I can send you. Off to futz around in the shop until it get's too hot. Will see if I can scare one up for you...
 
bplust
bplust

bplust

Addicted to ArboristSite
. AS Supporting Member.
Joined
Dec 28, 2010
Messages
1,750
Location
WHEELOCK
Terrill FA

I acquired a Terrill FA recently. I'm considering restoring it.

Does anyone have some pictures of a clean complete one? If so, please send them to [email protected] or post em' here.

Also, does anyone have any parts? I know I need at least a pulley cover and an engine top cover.

Thanks in advance,

Bryan
 
Mr. Bow Saw
Mr. Bow Saw

Mr. Bow Saw

Addicted to ArboristSite
Joined
Jun 15, 2009
Messages
9,551
Location
CA.
bplust said:
I acquired a Terrill FA recently. I'm considering restoring it.

Does anyone have some pictures of a clean complete one? If so, please send them to [email protected] or post em' here.

Also, does anyone have any parts? I know I need at least a pulley cover and an engine top cover.

Thanks in advance,

Bryan
Click to expand...

Mine has everything but top cylinder cover.
0.84


attachment.php


attachment.php


attachment.php


attachment.php
 
Rowan
Rowan

Rowan

ArboristSite Operative
Joined
Jan 3, 2008
Messages
350
Location
Mississauga, ON
Rowan said:
Looking for a top cover/heat sheild, and a recoil for a Pioneer RA? Cash or trade... I have an running 031AV, and a couple of smaller pioneers (1073 1074) both have good compression, one is without spark.

Assuming I'll likely need seals etc.... haven't started pulling it apart yet. If I get rained out of my outdoor work this weekend I may start stripping it down to see what all I need.
Click to expand...

Found a starter.... but it has a broken recoil spring. Now looking for a spring for either an RA or one from a 600 series Pioneer.... Also still looking for a top cover and heat shield.
 
67L36Driver
67L36Driver

67L36Driver

Tree Freak
. AS Supporting Member.
Joined
Nov 1, 2010
Messages
14,590
Location
St. Joseph, MO
Rowan said:
Found a starter.... but it has a broken recoil spring. Now looking for a spring for either an RA or one from a 600 series Pioneer.... Also still looking for a top cover and heat shield.
Click to expand...

I found a spring for my RA on a peg board down at Jeffs Small Engine repair.

Plastic bag has "Stens 155-044, replaces Tecumseh 590433". Fits very well and works fine.

It is a Fairbanks-Morse starter.
 
Rowan
Rowan

Rowan

ArboristSite Operative
Joined
Jan 3, 2008
Messages
350
Location
Mississauga, ON
67L36Driver said:
I found a spring for my RA on a peg board down at Jeffs Small Engine repair.

Plastic bag has "Stens 155-044, replaces Tecumseh 590433". Fits very well and works fine.

It is a Fairbanks-Morse starter.
Click to expand...

Thanks for the info... I found an online source "Rotory Corp Canada" and placed an order... brand new spring for just under $14... shipping on top though.

One step closer:rock::rock::rock:
 

Similar threads

Old Mac Guy
Some Times I Hate Lombards, But Love KeenKutter
Replies
6
Views
809
Old Mac Guy
Old Mac Guy

Latest posts

Top