Dapper Dan
ArboristSite Operative
Here is picture of the new bar
After a light wipe with thinner.
The red "Logo" paint wiped right off.
The white was not affected so....must be powder coated, or some sort of urethane.
The bar below is the Stihl 18" bar I cleaned up with the scotch brite.
After a light wipe with thinner.
The red "Logo" paint wiped right off.
The white was not affected so....must be powder coated, or some sort of urethane.
The bar below is the Stihl 18" bar I cleaned up with the scotch brite.
Last edited: