timberwolf logsplitter table grate

[captjack]

can someone give me the dimensions of the factory table I have a tw5 and need to make a new table. I want to make the factory table (unless someone has a better design)

length x width and tube size and spacing

thanks fellas

 

[John_DeereGreen]

I don't have mine handy, but if I recall correctly, it is 18x24 inches, 1 inch OD tube, spaced about 1.5 inches apart.

 

[ponyexpress976]

those dimensions sound about right...make it a little wider than the two supports on the beam. I drilled two holes in mine and bolted it to the wedge lift cylinder mount. make the tubes extend all the way under the wedge to catch stuff.

 

[captjack]

any close up pics would be nice

 

[captjack]

can anyone confirm these specs for me or get some close up pics of the mounting and how far under the tubes go on the machine

thanks

 

[Ohio066]

going to the local dealer to see one next week. get pics. and mesure.

 

[captjack]

thanks - i just ordered 24 fr of 1 inch pipe

 

[Ohio066]

from timberwolf sitehttp://www.arboristsite.com/attachment.php?attachmentid=261814&d=1352655125