redbull660
Addicted to ArboristSite
Shipping - USPS or UPS. I do have a fedex acct as well but never used it...but can if you desire fedex service.
Payment - personal check, Money order, Paypal gift.
I'll start at the top of pic
note - there is a lot of oil on the sleeves because I did all my test cuts with full oiler and would bring multiple bars with me. So I would put an oiled up bar into the sleeve right away so not to mix up or get scratched up etc.
Stihl ES 25" Bar - 3/8 .050 3-8830 Condition: used for a few test cuts. $58
Stihl 25" RS (rapid super) 3/8 .050 Chain - Condition: used for a few of test cuts. $22
Stihl 25" RD (Rapid Duro Carbide) 3/8 .050 Chain - Condition: re sharpened with diamond wheel once. Sharper than factory ready to go. Ultra clean, looks like new. This was a personal chain and I did put it together with a few pieces from left over reels. Therefore there are a couple of places where there are two left or right cutters in a row. Not a concern, but should be mentioned. $75 I am selling only because I'm moving to .063.
*SOLD Stihl 25" Wide Nose Bar - 3/8 .063 3-9831 - Condition - New. Should mention it says made in brazil. I have another and it works fine. I am only selling because I don't need two. $75
*SOLD Stihl 25" RS ( rapid super) 3/8 .063 Chain - Condition - used for a few test cuts. $22
Stihl 25" RD ( rapid Duro carbide) 3/8 .063 chain - Condition - Used for a few test cuts - $84
Stihl 28" Bar - 3/8 .050 - 3-8838 Condition - used for a few test cuts - $65
Stihl 28" RSLH (Sq. ground half skip) 3/8 .050 Condition - used for a few test cuts - $24
Stihl 28" RS (rapid super) 3/8 .050 Condition - (3 available) (2) used for some test cuts $22 ea. (1) needs to be sharpened $20
Stihl 20" Bar - 3/8 .050 - 3-8822 3/8 .050 Condition - used for a few test cuts - $48
Stihl 20" RS (rapid super) 3/8 .050 Condition - used for a few test cuts - $20
*SOLD Stihl 28" Light Bar 3/8 .063 3-2038 Condition - used for multiple test cuts - $115
Stihl 28" RD (rapid duro carbide) 3/8 .063 Chain - used for a couple of test cuts - $91
Stihl 28" RS (rapid super) 3/ .063 Chain - 2 available - used for multiple test cuts - both are close to needing to be resharpened. They were purchased new and have NOT be re sharpened yet - $20 ea
Carlton/Tsumura 28" 3/8 .063 Bar - Condition - used but taken care of. No issues at all. $75
Left side of pic 1...
Stihl 20" RD (rapid duro carbide) 3/8 .063 - used for a couple of test cuts $72
Stihl RD 3/8 .063 Chain - can make you whatever size chain you want $1 per DL - this chain was all used for a few test cuts and then taken apart. (I wanted all my tests to use brand new chain...so do a few test cuts, next test and replace with new chain)
Stihl RD replacement or back up DL's & Cutters. 3/8 .063gauge. Link of 4 DL's and 1 Left RD cutter and 1 right RD cutter - $4 ea
Payment - personal check, Money order, Paypal gift.
I'll start at the top of pic
note - there is a lot of oil on the sleeves because I did all my test cuts with full oiler and would bring multiple bars with me. So I would put an oiled up bar into the sleeve right away so not to mix up or get scratched up etc.
Stihl ES 25" Bar - 3/8 .050 3-8830 Condition: used for a few test cuts. $58
Stihl 25" RS (rapid super) 3/8 .050 Chain - Condition: used for a few of test cuts. $22
Stihl 25" RD (Rapid Duro Carbide) 3/8 .050 Chain - Condition: re sharpened with diamond wheel once. Sharper than factory ready to go. Ultra clean, looks like new. This was a personal chain and I did put it together with a few pieces from left over reels. Therefore there are a couple of places where there are two left or right cutters in a row. Not a concern, but should be mentioned. $75 I am selling only because I'm moving to .063.
*SOLD Stihl 25" Wide Nose Bar - 3/8 .063 3-9831 - Condition - New. Should mention it says made in brazil. I have another and it works fine. I am only selling because I don't need two. $75
*SOLD Stihl 25" RS ( rapid super) 3/8 .063 Chain - Condition - used for a few test cuts. $22
Stihl 25" RD ( rapid Duro carbide) 3/8 .063 chain - Condition - Used for a few test cuts - $84
Stihl 28" Bar - 3/8 .050 - 3-8838 Condition - used for a few test cuts - $65
Stihl 28" RSLH (Sq. ground half skip) 3/8 .050 Condition - used for a few test cuts - $24
Stihl 28" RS (rapid super) 3/8 .050 Condition - (3 available) (2) used for some test cuts $22 ea. (1) needs to be sharpened $20
Stihl 20" Bar - 3/8 .050 - 3-8822 3/8 .050 Condition - used for a few test cuts - $48
Stihl 20" RS (rapid super) 3/8 .050 Condition - used for a few test cuts - $20
*SOLD Stihl 28" Light Bar 3/8 .063 3-2038 Condition - used for multiple test cuts - $115
Stihl 28" RD (rapid duro carbide) 3/8 .063 Chain - used for a couple of test cuts - $91
Stihl 28" RS (rapid super) 3/ .063 Chain - 2 available - used for multiple test cuts - both are close to needing to be resharpened. They were purchased new and have NOT be re sharpened yet - $20 ea
Carlton/Tsumura 28" 3/8 .063 Bar - Condition - used but taken care of. No issues at all. $75
Left side of pic 1...
Stihl 20" RD (rapid duro carbide) 3/8 .063 - used for a couple of test cuts $72
Stihl RD 3/8 .063 Chain - can make you whatever size chain you want $1 per DL - this chain was all used for a few test cuts and then taken apart. (I wanted all my tests to use brand new chain...so do a few test cuts, next test and replace with new chain)
Stihl RD replacement or back up DL's & Cutters. 3/8 .063gauge. Link of 4 DL's and 1 Left RD cutter and 1 right RD cutter - $4 ea
