rebuilding the carb on my craftsman/roper 3.7. its a walbro SDC-73. this is a bastard carb that has an accelerator pump (walbro diaphragm part no. 95-44) on the side of the carb. this is in addition to the normal meter and pump on the ends. this component, , is NLA. this same component is used on the following walbro SDC carbs:
1 - Homelite XL101, 102, 103, 104
12 - Homelite 700, 800, XL901/700/800/800AM/850/900E/VL900EMA
21 - Homelite XL 122/123/113/114
23 - Homelite XL 913/913M/914M/913FP
25 - Homelite XL 113/114/112
26 - Homelite XL 400AV, XL400Auto FP
27 - Homelite XL 923/921/924
28 - Homelite XL 400Dom./400Auto
31 - Homelite XL 123
32 - Homelite XL 123
67A - Roper CJD Sears Saw
81 - Homelite VI-130
81A - Homelite VI-130.
sorry for the long post but i know some of you guys have some of these saws. i need to either find a source for this illusive part or determine which carb will swap in. anyone got any ideas?
thanks, jerry
1 - Homelite XL101, 102, 103, 104
12 - Homelite 700, 800, XL901/700/800/800AM/850/900E/VL900EMA
21 - Homelite XL 122/123/113/114
23 - Homelite XL 913/913M/914M/913FP
25 - Homelite XL 113/114/112
26 - Homelite XL 400AV, XL400Auto FP
27 - Homelite XL 923/921/924
28 - Homelite XL 400Dom./400Auto
31 - Homelite XL 123
32 - Homelite XL 123
67A - Roper CJD Sears Saw
81 - Homelite VI-130
81A - Homelite VI-130.
sorry for the long post but i know some of you guys have some of these saws. i need to either find a source for this illusive part or determine which carb will swap in. anyone got any ideas?
thanks, jerry
