What i bought on black Friday

[joe25DA]

I picked up these 2 poulans today from a guy who was gonna scrap them. $30 later they were in the back of my truck, saved from the scrap pile. First is a micro Deluxe 25. Good p&c and compression, no spark. This saw has electronic ign., what we think bad coil? The front handle is bent a bit and one tooth on the starter pawl is broken. Not sure what the future is for this one...But the 3400, thats another story. The saw was lightly used from what I see and will clean up nicely. Its in great shape, except for a broken side cover:censored:. This had a great p&c, 140psi and good spark. Carb kit and fuel lines is all this will need!! Also the orig b&c are in great shape. VERY happy with this one.
<a href="http://s729.photobucket.com/albums/ww294/joe25da/?action=view&current=saws367.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww294/joe25da/saws367.jpg" border="0" alt="Photobucket"></a>
3400
<a href="http://s729.photobucket.com/albums/ww294/joe25da/?action=view&current=saws368.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww294/joe25da/saws368.jpg" border="0" alt="Photobucket"></a>
<a href="http://s729.photobucket.com/albums/ww294/joe25da/?action=view&current=saws369.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww294/joe25da/saws369.jpg" border="0" alt="Photobucket"></a>

 

[boda65]

I think I have a handle and coil to fit that. It's yours for postage if you need it. Just PM me.

 

[Kwdog75]

Nice score!

 

[demographic]

I'm sorry to de-rail this thread slightly but Black Friday

Over here we have what's called Blackeye friday, which is the last working Friday before crimbo. Most of the building companies work the morning (just cleaning up and so on) and have a massive drinking session in the afternoon.

Its a Friday and after a few beers there's usually a bit of mayhem at chucking out time, thats whay its called Blackeye Friday.

Oh, err, sorry. ahem... as you were:monkey:

Good find on the saws.

 

[Modifiedmark]

Can't beat the deal on those 2!

Your on a roll Joe.

 

[Oregon_Grown]

Nice

Nice use of a cookie sheet! What temp do you back those at and for how long?

 

[joe25DA]

Thanks guys, the 3400 will cleanup nice and will be a runner!!
I bake my poulans 350* at 10,000rpm

 

[Teddy.Scout]

Nice score! :greenchainsaw:

 

[chainsawwhisperer]

I think I have a handle and coil to fit that. It's yours for postage if you need it. Just PM me.

Let me know if you need anything else that Boda doesn't have I'll fix you up - same deal, just postage.
Jim

 

[Firewood Hack]

Nice use of a cookie sheet! What temp do you back those at and for how long?

375 until the smoke alarm goes, like my wifes cooking.

 

[scotclayshooter]

I'm sorry to de-rail this thread slightly but Black Friday

Over here we have what's called Blackeye friday, which is the last working Friday before crimbo. Most of the building companies work the morning (just cleaning up and so on) and have a massive drinking session in the afternoon.

Its a Friday and after a few beers there's usually a bit of mayhem at chucking out time, thats whay its called Blackeye Friday.

Oh, err, sorry. ahem... as you were:monkey:

Good find on the saws.

Black friday is Friday the 13th
Mad Friday is the last one before crimbo

 

[Bubbles Up]

I saw this post a few hours late,but I just threw in the scrap bin a craftsman xxv .It was complete except for the piston, the electronic module was junk.the starter handle just the "T" pull was busted.I would have sent you everything for the cost of shipping.

 

[HARRY BARKER]

I picked up these 2 poulans today from a guy who was gonna scrap them. $30 later they were in the back of my truck, saved from the scrap pile. First is a micro Deluxe 25. Good p&c and compression, no spark. This saw has electronic ign., what we think bad coil? The front handle is bent a bit and one tooth on the starter pawl is broken. Not sure what the future is for this one...But the 3400, thats another story. The saw was lightly used from what I see and will clean up nicely. Its in great shape, except for a broken side cover:censored:. This had a great p&c, 140psi and good spark. Carb kit and fuel lines is all this will need!! Also the orig b&c are in great shape. VERY happy with this one.
<a href="http://s729.photobucket.com/albums/ww294/joe25da/?action=view&current=saws367.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww294/joe25da/saws367.jpg" border="0" alt="Photobucket"></a>
3400
<a href="http://s729.photobucket.com/albums/ww294/joe25da/?action=view&current=saws368.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww294/joe25da/saws368.jpg" border="0" alt="Photobucket"></a>
<a href="http://s729.photobucket.com/albums/ww294/joe25da/?action=view&current=saws369.jpg" target="_blank"><img src="http://i729.photobucket.com/albums/ww294/joe25da/saws369.jpg" border="0" alt="Photobucket"></a>

seafoam,high heat paint,PB blaster,tool oil,Toro touch up paint,more PB blaster,and a 1/2" impact ........looks like your all set.

 

[Oregon_Grown]

^5 reply!

Thanks guys, the 3400 will cleanup nice and will be a runner!!
I bake my poulans 350* at 10,000rpm

That's what I was thinking and if they dont brown properly put tin foil over them!

 

[Kogafortwo]

That micro is the same saw as my little Craftsman, or very close to it. It's gonna be my first porting project, after I practice on a dead blower.

 

[Bootsie]

Black friday is Friday the 13th
Mad Friday is the last one before crimbo

Correct me if I am wrong, I am Canadian. Black Friday is the greatest shopping day of the year in the US it is the Friday following thanksgiving

 

[ericjeeper]

a question

what is Crimbo?

 

[chainsawwhisperer]

what is Crimbo?

It's the day after 'Akimbo'

 

[joe25DA]

seafoam,high heat paint,PB blaster,tool oil,Toro touch up paint,more PB blaster,and a 1/2" impact ........looks like your all set.

Yeah, that's some of my stuff.
I try to have the stuff I need for the job, but always need more! Thanks to the guys offering parts for the micro!

 

[OhioGregg]

Nice find again Joe!! I see that 3400 is an early model. I have never heard, date wise, when they made the minor changes, which aren't very noticable. First thing I noticed, it has the small screws and rod for the rear antivibe. Another thing I have found on one I have, is the oil cap is different also, and won't interchange, at least on the one I came across.

Only other things I was able to find was some extra strengthening in the boss's for the antivibe areas, and a spot or two in the crank case, on the later ones.

Good lookin saw!!!


Gregg,