What is the part number for this Stihl 032AV stop switch?

[derekc]

This is what I usually see on 031AV. The part number is 1110 430 0202 I believe.



But my 032AV kill wire (from the coil) have this connection:



So, it needs a different stop switch. Any knows the part number?

 

[hotshot]

This is what I usually see on 031AV. The part number is 1110 430 0202 I believe.

View attachment 317090

But my 032AV kill wire (from the coil) have this connection:

View attachment 317091

So, it needs a different stop switch. Any knows the part number?

View attachment 317092

1110-430-0202, it shows the same switch but it goes on the outside of the terminal, instead of inside
for more contact area

 

[derekc]

No, it doesn't fit.
I had the switch. It was different than 1110-430-0202. Now I need one and I looked thru my PDFs and Internet and could not find it.

 

[Arrowhead]

My ipl's say 1110-430-0202 for the 031 and 032. Can you change the terminal on the wire?

 

[hotshot]

No, it doesn't fit.
I had the switch. It was different than 1110-430-0202. Now I need one and I looked thru my PDFs and Internet and could not find it.

You made me go look at two saws & pull switches, the 031 & 032 both work fine with the different terminals.

Is the OD of the hollow type wire terminal too large to fit into the switch you have?

Sounds like you may have something "SWITCHED". HAHA

There was also a 1111 420 0210 switch used on the larger S051 & S075 saws.

 

[Dogalot]

I recently replace mine - it was plugged into the wire right at the switch.

 

[Alongshot]

I just pulled the wire off my 032 switch, the switch and hollow terminal wire are the same looking as the pics you posted, the hollow wire terminal slips over the brass on the switch on mine.