What's on your bench today? 9/8/11
- Thread starter TK
- Start date
Help Support Arborist Forum:
I have one of my PP330's apart right now. I am in the process of making it a super 380. I have the P&C on it, I need to put the hda-137 carb and the 3 shoe clutch on it and it will be ready to fire up.
splitpost
Nothing but 32:1
One slightly used Ported 044BB P&C ,and one OEM Ported cylinder with a new meteor piston already fitted to saw,vac tested,and 1/2 a tank Guzzo through it
little possum
Crash and Burn
A 281 almost completed. Needs a clutch cover and a carb kit. Also maybe more parts that I didnt know that it needs, but it runs without them
Put the dawgs and clutch cover on the 394. Gotta get the muffler welded up.
350 for a friend.
Thats all for now
Put the dawgs and clutch cover on the 394. Gotta get the muffler welded up.
350 for a friend.
Thats all for now
a bunch of clamshells 2 ms290s 1 is mine and just needs rings and 1 my nephews it was straight gassed and needs a new meteor piston. and last a 029super that has bad carbon scoring, ohhh and if i get time a ms440 with a erratic idle thinking a carb kit and fuel lines:msp_wink:
J.Walker
Addicted to ArboristSite
Just give my Husky 575xp a cleaning after using it on a job and firewood cutting this past weekend.
Working on a well used Husky 365 Special that won't keep running. Changed it's coil to no advail. Replaced the inpulse line too!
Got a box together for PB with the remains of a 2165.
.
Working on a well used Husky 365 Special that won't keep running. Changed it's coil to no advail. Replaced the inpulse line too!
Got a box together for PB with the remains of a 2165.
.
Mr. Bow Saw
Addicted to ArboristSite
Right now working on restoring a Poulan F100.
o8f150
Tree Freak
not a dang thing right now:bang::bang:
John in MA
Addicted to ArboristSite
A Homelite VI-123 I'm getting ready to sell. I'm not even fixing it, just putting the old project back together. My life has little room for extra saws now, unfortunately.
R2D
North pole greens keeper
I guess you can say I "made the mistake" of buying a saw this week that needs nothing. Bench is empty. Need a broken saw! :bang::bang:
This has my attention, I thought they sounded pretty badass to begin with :msp_thumbup: A nice, oldskool kinda sound to it. Must have pics and video of this when it's done
russhd1997
Innocent By Stander
Got my Dolmar 114 apart on the bench. It needs a piston and cylinder.
BloodOnTheIce
Addicted to ArboristSite
If you need help I do work for beer.
J.Walker
Addicted to ArboristSite
Guido Salvage
Supreme Saw Whoreder
Since moving to Kentucky...
A) I have no bench
B) I have no saws with me
C) I have far too much time to spend here
Going back to Virginia tomorrow for a few days. Never know what might turn up in my travels.
A) I have no bench
B) I have no saws with me
C) I have far too much time to spend here
Going back to Virginia tomorrow for a few days. Never know what might turn up in my travels.
Finishing up that Mall 2MG, now that I finally got a working coil, and then into a old sand cast Poulan 42.
Neighbor brought me a Wild Thing and a Plastic Homelite S33 or something like that. Homelite has no spark so it's practically landfill material and we did have the WT running but I'm guessing some carb work is in order.
Rigwelder
ArboristSite Member
Finishing up paint on a 064. Waiting on parts for a 029 super. And working on taking a old mac apart that i am not sure what it is still working on that all decals are off. It has a bow on it so that is y i am fixing has spark thats about as much as i know.
This has my attention, I thought they sounded pretty badass to begin with :msp_thumbup: A nice, oldskool kinda sound to it. Must have pics and video of this when it's done
Will get some pics up tom, muffler is pretty chincy. Just got it apart before dark. Will continue tom.
