Tree had a slight lean straight away from the camera and was a bit weight loaded to the right. Diameter right at 20" at the falling cuts - that was about chest high due to the co-dominant stem that was there prior.
My brush pile is direct to left.
Figured I could undercut aimed at the brush pile, back cut and wedge.
Worked great up until it was time to wedge. Hammered on the plastic and no go, back in with saw for a touch - pinched it solid.
Inboard clutch - greatest thing ever invented. Power head dropped right off.
Retrieved a metal wedge and sledge and tap, tap, tap, tree goes, it step back several feet. Snap and you see the result.
CSI time. What went wrong? Didn't take a genius. My undercut was way too shallow of an angle. Barberchaired as soon as the undercut closed.
Another shot from the opposite side.
The stub stood back up as when I worked up the tree and cut it free an hour later.
At least it landed right where I wanted and my shorts were still clean.
My brush pile is direct to left.
Figured I could undercut aimed at the brush pile, back cut and wedge.
Worked great up until it was time to wedge. Hammered on the plastic and no go, back in with saw for a touch - pinched it solid.
Inboard clutch - greatest thing ever invented. Power head dropped right off.
Retrieved a metal wedge and sledge and tap, tap, tap, tree goes, it step back several feet. Snap and you see the result.
CSI time. What went wrong? Didn't take a genius. My undercut was way too shallow of an angle. Barberchaired as soon as the undercut closed.
Another shot from the opposite side.
The stub stood back up as when I worked up the tree and cut it free an hour later.
At least it landed right where I wanted and my shorts were still clean.
Last edited: