ponyexpress976 nipple fritters Joined Feb 17, 2008 Messages 1,394 Reaction score 347 Location new tripoli, pa Feb 21, 2014 #21 The only time mine goes all the way back is if the auto valve gets there before the next round or when I'm done for the day.
The only time mine goes all the way back is if the auto valve gets there before the next round or when I'm done for the day.
hedge hog ArboristSite Guru Joined Jan 20, 2014 Messages 815 Reaction score 767 Location south centeral Kansas Feb 21, 2014 #22 for auto return splitters drill a hole in the top of the I-beam ( behind the push block were you want it to stop) and drop bolt in it . a lot faster to pull a bolt than to jack with cylinder stop!
for auto return splitters drill a hole in the top of the I-beam ( behind the push block were you want it to stop) and drop bolt in it . a lot faster to pull a bolt than to jack with cylinder stop!
S stihly dan Addicted to ArboristSite Joined Mar 6, 2012 Messages 2,840 Reaction score 1,988 Location nh Feb 21, 2014 #23 Brush Ape said: Here's what I call a ram. Click to expand... Where's the tire?
ttyR2 ArboristSite Guru Joined Oct 24, 2010 Messages 800 Reaction score 253 Location Oregon Feb 22, 2014 #24 Steel rubbing on the chromed surface of a cylinder rod? I'll take aluminum, thanks.
woodcuter ms361 ArboristSite Member Joined Dec 15, 2010 Messages 99 Reaction score 22 Location sw va Feb 23, 2014 #25 I drilled a series of 5/8 holes ,I drop a 5/8 bolt to shorten travel Attachments spliter 005 (Small).jpg 69.1 KB · Views: 12