where can I get a tach?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
stihl026man

stihl026man

ArboristSite Member
Joined
Feb 27, 2008
Messages
57
Location
Pennsylvania
anyone know where I can get a decent tach that wont break the bank so I can tune my own saws?? Baileys didnt have much of a selection so just looking for some opinions here. thanks!

Zack
 
Evanrude

Evanrude

Addicted to ArboristSite
Joined
Dec 12, 2007
Messages
1,640
Location
Gregory, MI
I dont know about the OP but for me, that tach seems a little too pricey for as much as I'd actually use it. I was originally going to get that one , but with the spending money getting tight (looking at getting a new saw), I dont want to spend much.
 
madrone

madrone

Addicted to ArboristSite
Joined
Dec 20, 2007
Messages
1,085
Location
oregon
DTI Tech Tach, TT-20K is the one I use (amicks sells it) and comes highly recommended by members on this site. Do a search and you'll find lots of info.
 
madrone

madrone

Addicted to ArboristSite
Joined
Dec 20, 2007
Messages
1,085
Location
oregon
See post #3 above. I believe that's the same tach. No?

DTI sells 2 very similar tachs, the tt-20k and the fast tach. They are basically the same tach just one is made for the shop and one for the woods (smaller).

And as far as those ENM tachs, They are not wireless and are very, very slow. But they are super cheap, sometimes as low as $23 on ebay.
 
Last edited:
OilHead

OilHead

ArboristSite Guru
Joined
Mar 21, 2007
Messages
638
Location
Bay Area, Ca.
The thing I like best about the DTI 20K is the max hold feature. The capture rate is fast enough where a one thousand one - one thousand two count will tell you where you are then off the throttle. Don't know about the other companys but the thin plastic sheet over the display is rather a cheap way of doing things. :buttkick:
 
Nuzzy

Nuzzy

Trail Gnome
Joined
Dec 15, 2007
Messages
1,502
Location
North Bend, WA
DTI Tech Tach, TT-20K is the one I use (amicks sells it) and comes highly recommended by members on this site. Do a search and you'll find lots of info.


After searching many threads here, I took that advice and placed my order for the DTI TT-20K from Amicks the other day. I'm stoked to get it :greenchainsaw:
 
Top