I read a true story about a Beagle that pushed a rabbit past the hunter 1, 2, 3 times. After the third miss, the Beagle bit the hunter!
Exactly, Merry Christmas Sir!!That's exactly what I often do (use a 50cc saw) - but don't underestimate the FUN factor!
Then I don't always use a 16" bar on a 60cc saw, it just is another option. It is the expected wood that dictates the bar length, usually not reach.
Exactly, Merry Christmas Sir!!
I must admit if I had a 560/2260 i'd give it a go, but I'm not buying a large mount 16" for my 562.
A 16" on a 372 is a firewood machine.I had one for my 372, but never got around to using it, before the saw was stolen.
It is a little Merrier seeing you actively posting again Troll, best of luck with your continued recovery.
I had one for my 372, but never got around to using it, before the saw was stolen.
Sorry to hear you have problems like that over there also. I grew up in a neighborhood where we did not lock the car doors or the house doors, even if you went away for the weekend. I feel like we have been going backwards ever since!
There was something to be said for the time when each house only had one car, one TV and most women did not work, and everyone looked out for one another. I fear that era has been permanently lost.
Almost every house had guns, and there were no school shootings. It would have been viewed as such a gutless thing to do, no one would even think of doing it.
And we call this progress???
A 16" on a 372 is a firewood machine.
When I put a 24" on my 385 I run an 8 pin. Reckon I'd need a 9 pin for a 16", or it would be four stroking in the cut or leaned out to a gazillion revs.I put one on my 390xp just for fun one day[emoji1]
When I put a 24" on my 385 I run an 8 pin. Reckon I'd need a 9 pin for a 16", or it would be four stroking in the cut or leaned out to a gazillion revs.
All that happens when I gear stuff up that fast is I make chains dull quicker! Bloody Aussie wood...
Just bought 6ac of scrub, about half is standing dead stringy bark from the last drought. I might be investing in some carbide chain or a 404 bar.Wish I had some of that bloody hard Aussie wood here to keep my house warm this winter here. Euc would be real nice right now.
Don't you have Madrone?Wish I had some of that bloody hard Aussie wood here to keep my house warm this winter here. Euc would be real nice right now.
Don't you have Madrone?
Just bought 6ac of scrub, about half is standing dead stringy bark from the last drought. I might be investing in some carbide chain or a 404 bar.
It's not the hardest timber in the world, but it always has white ant damage and it just trashes chains. Burns well enough, especially if you mix it with some red gum.
Enter your email address to join: