Did you read the description of my day? even just under cutting the limb wouldn't snap it. It peeled right over. I know it looked like the little stub was holding the weight of the rope above my hand, it wasn't. You can't see the whole situation in the video. I added the hitch just for backup in case it slipped. Not for strength.Some constructive criticism:
I think every cut you made you notched. There are several different types of cuts to make to get the wood to react differently when coming off. Where the tips were hitting first and the butt flying back you should of been using a jump cut or some call it a pop cut. To get a heavly leaning limb to come off and stay laying flat undercut from the bottom side until the limb will almost pinch the chain. You may have to pull the saw in and out of the cut to keep the kerf opened up as it closes. Then cut strait through the top side quickly and the limb will jump or pop off your cut. It is critical that your cuts line up though.
Also think about where your rigging is going after you cut it and stay the hell away from it. Your lucky you didn't wind up with a broken and burned arm.
Your half hitch when tying off one of the limbs should have been on the bottom side of your knot. Limbs of that size I don't even bother adding the half hitch, it's just to help displace the load on heavy wood.
Some constructive criticism:
I think every cut you made you notched. There are several different types of cuts to make to get the wood to react differently when coming off. Where the tips were hitting first and the butt flying back you should of been using a jump cut or some call it a pop cut. To get a heavly leaning limb to come off and stay laying flat undercut from the bottom side until the limb will almost pinch the chain. You may have to pull the saw in and out of the cut to keep the kerf opened up as it closes. Then cut strait through the top side quickly and the limb will jump or pop off your cut. It is critical that your cuts line up though.
Also think about where your rigging is going after you cut it and stay the hell away from it. Your lucky you didn't wind up with a broken and burned arm.
Your half hitch when tying off one of the limbs should have been on the bottom side of your knot. Limbs of that size I don't even bother adding the half hitch, it's just to help displace the load on heavy wood.
Enter your email address to join: