Worth???

[rahtreelimbs]

Anyone know what this saw is worth???

http://www.acresinternet.com/cscc.n...31b170ffe119534688256cba000b5c34?OpenDocument

 

[BostonBull]

What kind of condition is it in?

Do you have any pics?

 

[rahtreelimbs]

What kind of condition is it in?

Do you have any pics?

It was given to me a few yrs. ago...........don't know if it runs or not.


Pics..............a day or two I will have some!

 

[rahtreelimbs]

Pics!!!

Model: 3-19

--------------------------------------------------------------------------------
MANUFACTURED BY: STRUNK MANUFACTURING CO.
COATESVILLE, PENNSYLVANIA, U.S.A.
SERIES OR ASSEMBLY NUMBER:
YEAR INTRODUCED: 1952
YEAR DISCONTINUED: 1954
ENGINE DISPLACEMENT: 4.7 cu. in. (77 cc)
NUMBER OF CYLINDERS: 1
CYLINDER BORE: 2.0 in. (50.8 mm)
PISTON STROKE: 1.5 in. (38 mm)
CYLINDER TYPE: Aluminum with cast iron sleeve
INTAKE METHOD: Reed valve
MANUFACTURER ADVERTISED H.P.: 2
WEIGHT : 28 lbs. (12.7 kg) powerhead only
OPERATOR CONFIGURATION: One Man operation
HANDLEBAR SYSTEM: Rigid
CHAIN BRAKE: none
CLUTCH: Centrifugal
DRIVE TYPE: Gear reduction 3:1 ratio
CONSTRUCTION: Sand cast aluminum
MAGNETO TYPE: Wico FW2288
CARBURETOR: Tillotson MD-60A float type
MAJOR REPAIR KIT:
MINOR REPAIR KIT:
AIR FILTER SYSTEM: Skinner ribbon element
STARTER TYPE: Fairbanks Morse automatic rewind
OIL PUMP: Positive gravity feed
OPERATING RPM: 2,700 to 4,000
IGNITION TIMING: 0.175 in. (4.44 mm) before TDC
BREAKER POINT SETTING: 0.020 in. (0.51 mm)
FLYWHEEL/COIL AIR GAP: Position is fixed
SPARK PLUG TYPE: Champion J8J, Autolite A7X, AC M45
SPARK PLUG GAP: 0.030 in. (0.76 mm)
CRANKSHAFT MAIN BEARINGS: Ball
FUEL TANK CAPACITY: 64 fl. oz. (1.89 litres)
FUEL OIL RATIO: 1/2 pint to 1 Gallon = 16:1
RECOMMENDED FUEL OCTANE: Regular grade 72 to 83
MIX OIL SPECIFICATION: SAE 30 motor oil
CHAIN PITCH: 1/2 in.
CHAIN TYPE:
BAR MOUNT PATTERN:
SHORTEST GUIDE BAR SUPPLIED: 19 in. (48 cm)
LONGEST GUIDE BAR SUPPLIED: 24 in. (61 cm)
COLOUR SCHEME: Red enamel
PAINT CODES:
ILLUSTRATED PARTS LIST:
SERVICE MANUAL:

--------------------------------------------------------------------------------
COMMENTS: Used Power Products AH47 engine

--------------------------------------------------------------------------------

 

[Lakeside53]

I find most "vintage "saws vary from free to $50... but there are few exceptions!

 

[ASEMASTER]

Worth

Good Highly Ergonomic ,conversation Pice Of A Door Stop!

 

[retoocs555]

I find most "vintage "saws vary from free to $50... but there are few exceptions!

Ditto. Although, I don't see hardly any Strunks so this may be an exception. If it ran it definitely might be.

 

[JUDGE1162]

Nice paperweight, if you can get it running you never know it seems to be a rarer saw, there might be a collector out there would might want it.

 

[Old Mac Guy]

Considering how hard it will be to find the missing parts.... less than $10... or free... with recipient paying shipping. Nice tank decal... good enough to make new ones from... An excellent parts saw for someone who already has one to restore, in which case it's worth $35-50... See similar Strunks on eBay about six times a year... JMO

"He has never been known to use a word that might send a reader to the dictionary." - William Faulkner (about Ernest Hemingway)

"Poor Faulkner. Does he really think big emotions come from big words?" -
Ernest Hemingway (about William Faulkner)

 

[rmihalek]

Is it easy to explain how to make new decals by using the old one as a template?

 

[Old Mac Guy]

You can make a reasonable facimile using a scaled photo, a scanner, ink jet printer and some decent photo-editing software. But for an exact original-quality replica, you will need to use a little higher-quality adhesive-coated stock and maybe either offset or screen-printing.

{My, my... that sentence has a lot of hyphenated words in it!!}