I saw it on Ebay/Craigslist
- Thread starter trimmmed
- Start date
Help Support Arborist Forum:
Eccentric
Mister Wizard
That's not a Homelite. It's a Mono. Looks like the Mono buit Wards WD60 I have. That one's in nice shape. If he was local, I'd make him an offer....
What is with these CL people and their 'creative' spelling of McCulloch??? That's one I hadn't seen before. I'll add it to the list.
I can't be 100% certain because of the fuzzy/dark pics, but that looks more like a 450, 550, or Super 550 based on the squared off profile of the AF cover. Could be a later 250, Super 250, 300, or 380 however (if the cover's not as squared off as my eyes are telling me it is). I'd check it out if it was local, and would offer less than they're asking...
346xp for 325 obo
HUSQVARNA 346 XP 346XP CHAINSAW W/ 16" BAR AND CHAIN - eBay (item 320642663897 end time Feb-12-11 12:01:10 PST)
It looks clean but has a new p/c. If your looking for one of these I think Id offer him alittle less and see what he says.
HUSQVARNA 346 XP 346XP CHAINSAW W/ 16" BAR AND CHAIN - eBay (item 320642663897 end time Feb-12-11 12:01:10 PST)
It looks clean but has a new p/c. If your looking for one of these I think Id offer him alittle less and see what he says.
It doesn't look as nice at the one I picked up yesterday (just finished cleaning):hmm3grin2orange:
Or this one from the same guy:
procarbine2k1
Addicted to ArboristSite
watsonr
Addicted to ArboristSite
It doesn't look as nice at the one I picked up yesterday (just finished cleaning):hmm3grin2orange:
Or this one from the same guy:
That saw looks nice and the second one BIG, milling saw I take it?
Highway68
ArboristSite Lurker
Highway68
ArboristSite Lurker
Highway68
ArboristSite Lurker
Homelite C-5
Vintage Homelite C-5 21" chainsaw - St. Catharines Tools & Hardware For Sale - Kijiji St. Catharines Canada.
$125
Vintage Homelite C-5 21" chainsaw - St. Catharines Tools & Hardware For Sale - Kijiji St. Catharines Canada.
$125
Last edited:
Highway68
ArboristSite Lurker
Someone should follow up on this 575xp for $300
Husqvarna Chainsaw
Husqvarna Chainsaw 575 XP-74cc, 27 inch bar, runs great. Serious inquiries call 740-988-4300.
Husqvarna Chainsaw
Husqvarna Chainsaw 575 XP-74cc, 27 inch bar, runs great. Serious inquiries call 740-988-4300.
Hunt'n'photos
ArboristSite Member
SawGarage
Addicted to ArboristSite
It doesn't look as nice at the one I picked up yesterday (just finished cleaning):hmm3grin2orange:
Or this one from the same guy:
Nice 076, there Madrone... looks to be a bit of a frankensaw, (changed filter cover and looks like recoil/tank too...) but that's ok... @ 111cc, it's allowed to be WHATEVER it wants...
Nice 076, there Madrone... looks to be a bit of a frankensaw, (changed filter cover and looks like recoil/tank too...) but that's ok... @ 111cc, it's allowed to be WHATEVER it wants...
Good eyes. Ya, it sure is a big, heavy mo fo. :lifter:
It seems definitely an 076 with the oil fill on the side, the coil on the top of the flywheel and the newer stater pawls.
The muffler cover/rear handle is kind of lame. It seems the screened muffler is larger so to house it the cover needs spacers which widen the rear handle. I think it looks kinda strange.
I was cleaning it up earlier and it's starting to look better.
It does run sweeeeet and loud. :hmm3grin2orange:
SawGarage
Addicted to ArboristSite
yeah, I like the recoils on the 076...easier to change the cord. they are big and heavy, that's for sure...but they make up for it
is that handle setup that way from the factory?? I didn't notice till you said something...
got some big dogs on there with the full wrap??
I just picked up a 075 recently... needs handle wrap (or a new bar) filter cover (if you get the right one, I'm interested...
) and a fuel tank 
but it had a new 33" 404 chain, and sprocket, and a nice bar...
ALTHOUGH, he was selling it as a 066 with a 36" bar. boy, was I DISAPPOINTED when I showed up...
The muf cover/handle does seem factory or at least dealer installed. The same size allen head screws are used, just longer. I think i've seen the same set up in photos.
Some crews always required spark screens and maybe stihl had to come up with something after already designing the saw.
So he was selling an 075 as an 066?!
Kind of hard to mix them up, don't you think? Some CL people sux :angry2:
I'll buy a new 076 tag for the top cover if my dealer can get em. You're more than welcome to the 075AVE one that on there. I'll let ya know.
Some crews always required spark screens and maybe stihl had to come up with something after already designing the saw.
So he was selling an 075 as an 066?!
Kind of hard to mix them up, don't you think? Some CL people sux :angry2:
I'll buy a new 076 tag for the top cover if my dealer can get em. You're more than welcome to the 075AVE one that on there. I'll let ya know.
Last edited:
SawGarage
Addicted to ArboristSite
Yeah, after a 70 minute ride too..
he opened the door and brought THAT out... I said to myself,
WHAT
THE
F$^& ?!?!?!
is
THAT/?!/!?
not a terrible deal though, but was disappointed so much so, I actually made him an offer if I was ABLE to hear it fire, got a couple drops of mix down the throat (tank was empty... and probably leaking.. ;P ) and it popped good. I was STILL reluctant to dish over the money, I actually DROVE away, and 'phoned a friend' for an opinion, and turned around and bought it!!
bar/chain was worth atleast half of the price
J
he opened the door and brought THAT out... I said to myself,
WHAT
THE
F$^& ?!?!?!
is
THAT/?!/!?
not a terrible deal though, but was disappointed so much so, I actually made him an offer if I was ABLE to hear it fire, got a couple drops of mix down the throat (tank was empty... and probably leaking.. ;P ) and it popped good. I was STILL reluctant to dish over the money, I actually DROVE away, and 'phoned a friend' for an opinion, and turned around and bought it!!
bar/chain was worth atleast half of the price
J
watsonr
Addicted to ArboristSite
Homelite chainsaws
Here is one of the first production XL-12's. You can tell by the all black lettering on the recoil. $75 is a little steep but should clean up and run.
Homelite chainsaws
Here is one of the first production XL-12's. You can tell by the all black lettering on the recoil. $75 is a little steep but should clean up and run.
Homelite chainsaws
watsonr
Addicted to ArboristSite
