sefh3
Addicted to ArboristSite
I have one that has 62481 which matches what you say and I have another parts saw that has 23237. What is that then?
Swap meet...
- Thread starter Four Paws
- Start date
Help Support Arborist Forum:
I have one that has 62481 which matches what you say and I have another parts saw that has 23237. What is that then?
sefh3
Addicted to ArboristSite
I've done it many times and nothing ever came of it. Some of the calls would be from 2-3 hours away and that is not going to happen for a saw to tinker with.
I've got a few replies on here and just waiting for the bugs to be worked out.
Still looking for more projects though.
I'm with you on that. I have one on my CL and all I get is $150 for a mini mac? My supply of projects are extremely low as we speak also and the market is getting empty in this area.
parrisw
Tree Freak
I've done it many times and nothing ever came of it. Some of the calls would be from 2-3 hours away and that is not going to happen for a saw to tinker with.
I've got a few replies on here and just waiting for the bugs to be worked out.
Still looking for more projects though.
Cool, good luck!
FireMan2285
ArboristSite Operative
i hope this is the right place to post this. i got a homelite inter felling dog and bolts for trade or sale. i found it in my shop afther cleaning up today and i don't know what all it fits.but i'm sure it will fit some of the older big homelites.if you need pictures i can grab a few of it.
Eccentric
Mister Wizard
I'd like to see pics of it. Check to see if there's any numbers stamped into it too. Looking for dogs for my 1130G.
Eccentric
Mister Wizard
I'd have to dig through my IPL's to figure out what that block would be from. Could be a 1-40 series, 1-50 series, 200, or God knows what. I'll check later. Off to Mothers Day lunch with the family.
FireMan2285
ArboristSite Operative
ok the numbers stamped on it is 58961.and i'll ghet some pictures of it after i clean it up.
Last edited:
jimbo1490
ArboristSite Guru
I've got a just about complete 026 (pro crankcase) and a somewhat less than complete 036 (pro crankcase). Both have good (non pro) OEM P&C's, I think the 036 has an 034 cylinder, though
Ask Hittinsteel; i trade good stuff!
What do you have to trade? I'm preferring orange rather than gray lately.
Jimbo
Looking for a clutch cover and guide plates for a Remington PL-7. I would also be interested in a PL-7 parts saw. If you have this shoot me a PM I have lots to trade. Thanks,Dave
Anyone??
FireMan2285
ArboristSite Operative
here is some pictures of the homelite inter felling dog.and i also got a chain tightner from the saw saw that was in the box with it.
View attachment 183361View attachment 183362View attachment 183363
View attachment 183361View attachment 183362View attachment 183363
shawn022
ArboristSite Guru
Looking for the contact spring and ground wire for the master control switch on a ms 180. Thanks
I have a good Mac 10-10A a Homelite SXLA and a Pioneer 1074 that I have decided could use a rehomeing.
SawGarage
Addicted to ArboristSite
needing some small misc parts from a 50-288 brake covers... or complete covers...
a decent 266 top cover
268 272 intake, carb and filter stuff
61-272 brake cover
playboy playing cards :taped: for trade :msp_thumbup: or some something that might be dirtier...
a decent 266 top cover
268 272 intake, carb and filter stuff
61-272 brake cover
playboy playing cards :taped: for trade :msp_thumbup: or some something that might be dirtier...
Chris J.
Addicted to ArboristSite
roncoinc
Official Stihl Disser
homeowner homie muffler
Trying to help out the kid down the road.
muffler came loose so he tried to wire it on.
rattled so bad bolt tube tore out,etc,need another muffler.
this is one one of those 33cc or 35cc red box store saws..
Only one i have seen with the bolt holes OFFSET like this..
take a look in your piles and see if you have one that looks like this..
thank you
Trying to help out the kid down the road.
muffler came loose so he tried to wire it on.
rattled so bad bolt tube tore out,etc,need another muffler.
this is one one of those 33cc or 35cc red box store saws..
Only one i have seen with the bolt holes OFFSET like this..
take a look in your piles and see if you have one that looks like this..
thank you
SawGarage
Addicted to ArboristSite
Hey Chris, I have an earlier saw that's missing ALL the covers...
I could use one...I gotta get squared away with you on the 630 :msp_wink: just a BUNCH of things going on lately. ( I still laugh when I think of that Handle!!
)what are you wanting in trade for the recoil?
SawGarage
Addicted to ArboristSite
Trying to help out the kid down the road.
muffler came loose so he tried to wire it on.
rattled so bad bolt tube tore out,etc,need another muffler.
this is one one of those 33cc or 35cc red box store saws..
Only one i have seen with the bolt holes OFFSET like this..
take a look in your piles and see if you have one that looks like this..
thank you
SOMEONE!!! HELP :help: this MAN out!!! That homo-lite is WORSE than a Stihl in his shop!!
Chris J.
Addicted to ArboristSite
Hey Chris, I have an earlier saw that's missing ALL the covers...
I gotta get squared away with you on the 630 :msp_wink: just a BUNCH of things going on lately. ( I still laugh when I think of that Handle!!
what are you wanting in trade for the recoil?
Let's see...we're discussing the 630, a Jred 625/670 CC w/ bad CB, & the Husky cover & recoil. I'm still hoping for Jred 920/820 parts (looks like I'm SOL), & I could use a Stihl 16" b&c for my Stihl 025. Shoot me a PM or EM; we'll get this sorted so that I can package everything together.
I need to post a photo of the redneck/hillbilly full wrap handlebar :msp_tongue:.
SawGarage
Addicted to ArboristSite
SOL? I never said that, lol... I gotta dig out the box
been busy painting ALL the trim for the house, and the furniture for the baby's room 
haven't really touched a saw in a couple weeks (other than stopping by Roncoinc's place 
)LMAO!!
:monkey:
