Time for a little Christmas Giving

[Eccentric]

my homie projects are a C5 and a 330. haven't gotten bitten with the xl2 bug yet. thanks anyways.

I still need to get your C-5 parts sent out Jerry. Sorry again for the delay. Probably will go out this Tuesday. Carb. Intake manifold/reed block. AF cover. Clutch cover. I'll letcha know what the shipping hit was after it goes out.

Now for the daily 'bump'....

Sending a C-5 starter assembly to Brian13 for his C-52. I still have some Homelite C-Series, lotsa Homelite XL12/SXL-Series, and some McCulloch front-tank large frame saw parts (including a very good used stock bore McCulloch 250 cylinder) for folks that need them. PM me with whatcha need, and I'll see if I have it. If I have it to spare, it's yours for the cost of shipping. I don't have any other P/C's left to spare right now. A fellow here has inquired about my Stihl 031AV cylinder. Unless he declines, it's now spoken for. I'll post up again later if it becomes available once more.

 

[diggers_dad]

diggers_dad.......email me your [email protected] I'll send you one.


That means I have 1 left......speak up and the last file guide's yours!......but.....you'll have to email me your address!!!

email sent - Thanks and Merry Christmas to Dennis Cahoon!

 

[Eccentric]

031AV cylinder is now officially spoken for, and will be on its way to a new home in a few days.

 

[andydodgegeek]

This is the best christmas ever!

 

[struggle]

Up for anyone is a Homie 360 parts. Tank assembly,crank case, carb,handle and various other bits. Air-cleaner cover. The pick up for the flywheel. flywheel. Cylinder and piston were shot from object ingested and crank was bad as well. Case looked good but is dirty now from sitting around.

You cover shipping:msp_tongue:

 

[tbone75]

Up for anyone is a Homie 360 parts. Tank assembly,crank case, carb,handle and various other bits. Air-cleaner cover. The pick up for the flywheel. flywheel. Cylinder and piston were shot from object ingested and crank was bad as well. Case looked good but is dirty now from sitting around.

You cover shipping:msp_tongue:

I wonder if that pick up would work on this 340 I have?I sure need one! LOL

 

[DSS]

I wonder if that pick up would work on this 340 I have?I sure need one! LOL

No, read this John. Good luck.

http://www.arboristsite.com/chainsaw/133089.htm

 

[tbone75]

No, read this John. Good luck.

http://www.arboristsite.com/chainsaw/133089.htm

Thanks Chris! I am so happy this is (NOT) my saw LOL I am trying to fix it for a friend of my brothers.He can have it back to throw in the trash LOL

 

[jerrycmorrow]

So what you're saying is, you wish you had an XL 2 to work on?

What do you need for the 330?

need everything on the clutch side: clutch, sprocket, washers, bolts, clutch cover, inner and outer guide bar plates, bar, chain. all-in-all - not much. lol thanks for asking. jerry

oh yeah, need a air filter too. mine just crumbled in my hand.

 

[Metals406]

need everything on the clutch side: clutch, sprocket, washers, bolts, clutch cover, inner and outer guide bar plates, bar, chain. all-in-all - not much. lol thanks for asking. jerry

oh yeah, need a air filter too. mine just crumbled in my hand.

I think I gotcha covered. . . I'll help Jake out on his shipping and box, and you can have an all in one.

 

[DSS]

Thanks Chris! I am so happy this is (NOT) my saw LOL I am trying to fix it for a friend of my brothers.He can have it back to throw in the trash LOL

Strip it and sell the parts on the bay. Not that many of them around.

 

[tbone75]

Strip it and sell the parts on the bay. Not that many of them around.

I have never sold anything on fleabay LOL Sure bought enough! :hmm3grin2orange:

 

[Arrowhead]

It's new, a little dusty from sitting on the shelf. Free to a good home.

 

[o8f150]

It's new, a little dusty from sitting on the shelf. Free to a good home.

i don't want it,,my wife would expect me to build someting:biggrin::biggrin::biggrin:

 

[jerrycmorrow]

I still need to get your C-5 parts sent out Jerry. Sorry again for the delay. Probably will go out this Tuesday. Carb. Intake manifold/reed block. AF cover. Clutch cover. I'll letcha know what the shipping hit was after it goes out.

thanks much aaron. merry christmas

 

[jerrycmorrow]

I think I gotcha covered. . . I'll help Jake out on his shipping and box, and you can have an all in one.

whoah! way cool. thanks so much. merry christmas to you too. jerry

 

[727sunset]

Cordless trouble light

This isn't really saw related but it's in the spirit of giving. I have a cordless trouble light New In Box (never been opened). It's free to any member, if you pay the shipping. First to PM me with their address etc can have it. And just so we're all aware it'll be sent from Ontario, Canada.

Thanks and Merry CHRISTmas to everyone.

 

[727sunset]

Here's a couple pics of the trouble light

View attachment 210017View attachment 210019

 

[tomdcoker]

Christmas giving

The first item is a McCulloch muffler. the part number is 300628. It says assembled in Mexico so it may be for one of the presently sold McCullochs. The halfs will not seperate so I do not know how it would be mounted.
The second item is an airfilter for a McCulloch. Possibly a Minimac. The part number is 61460. If you need you will know what it is for. I have three of these filters. Tom

Will someone please open these pictures for me. Tom

One of the filters is gone.

 

[diggers_dad]

It's new, a little dusty from sitting on the shelf. Free to a good home.

Those are really handy when I do carpentry. Whoever gets it will enjoy it. Best way to hold a hammer I've ever found.