Swap meet...

[ChainsawmanXX]

Anyone have a 180 stihl parts saw??

 

[thomas1]

Anyone have a 180 stihl parts saw??

I have a 170, whatcha need?

 

[o8f150]

Thanks, Neal. Their behavior really can be irritating. :msp_angry:

:msp_tongue::msp_tongue::msp_tongue::msp_tongue:

 

[ChainsawmanXX]

I have a 170, whatcha need?

Almost all the plastic. Saw got ran over by a D4
Old logger wants it for limbing (83 years old and still falling trees)

 

[thomas1]

Almost all the plastic. Saw got ran over by a D4
Old logger wants it for limbing (83 years old and still falling trees)

Shouldn't be a problem. I won't be back to the saw until Monday, though. I will get some pics then.

 

[DSS]

I started a thread in the OTF just for all the guys that still have a sense of humor......

In other news........

I really need a case gasket for a Husky 2100.


I would gladly pay worthless green paper, or....I could have my friend Arrowhead Ed mount you in exchange. :msp_wink:

I might make/buy/steal/borrow a damn gasket for you, depending on the quality of said mounting.

 

[DSS]

Wifes student loans came due and we are poor for a while but I need 3/8 .058 chain at the moment...

058 is pretty uncommon around here but all my 6401 bars are 058 3/8 now. I do have access to a breaker and spinner to resize or splice pieces into loops. I also have a few decent size chunks of new 73lg 058 3/8 from my dealer (remanants of 100ft reels). If anyone has the same then maybe I could splice a couple loops together for myself. I do have access to a grinder to so I can sharpen if need be.

I have good used 3/8 050 chains i could trade. I have some new 18in loops of Oregon 3/8 050 full chisel too. I have some small mount stihl bars with chains 12-14in... I have other parts laying about but need to sort out what I have that can go...

I got 3/8 058 loops I could trade you for 050. 72 and 84 dl. I think it's LGX but I'll hafta find them.

 

[sefh3]

Stihl looking for a rear handle, top cover, and intake flange for an 041 Super. The handle setup and cover is not the same as a Farmboss 041.

 

[diggers_dad]

Almost all the plastic. Saw got ran over by a D4
Old logger wants it for limbing (83 years old and still falling trees)

If you need something he doesn't have shoot me a PM, I think I still have some 017 / 018 plastic here and there.

dd

 

[nstueve]

I got 3/8 058 loops I could trade you for 050. 72 and 84 dl. I think it's LGX but I'll hafta find them.

deal let me know what you find... I'll go hunt up the loops I have...

Also for anyone that might know... If I have the old husky D024 10mm slot on some bars... Can I grind it out to 12mm and use the stihl/husky adapter so I can run Stihl and Husky D009 mounts on the same bar?

 

[bplust]

I have 4 or 5 600 series Jonsered (625, 630, 670) parts saws, and I'm looking for a Shindaiwa 575 clutch cover.

Bryan

 

[Alex D]

Anybody got a low hour 660 clutch? Have cash and may also have some things for trade...

 

[Duke Thieroff]

Up for trade

MS 440 cylinder, OEM, should clean up with some acid and elbow grease.

A victim of straight gas

Interested in most anything of use.


Chris

Looking for some Husky 359/Jred 2159 parts.

Looking for a muffler and a piston and possibly cylinder.


Chris

 

[Metals406]

Looking for a 385 or 390. . . Can be DOA. Just needs to have the starter, top, and clutch cover, as it will be used to template on fer handles. Edit: Brake handle has to be on it as well.

If you don't want to sell it, perhaps I can "borrow" it in exchange fer something?

 

[homelite028]

p50 with extra parts

i have a nice p50 pioneer holding 150psi what they hold out the factory new nice piston and jug extra parts .. I like to trade to husqvarna 281 288 181 or stihl 051 or 056 .... i have to many pioneers saws want to try somethang new the saw runs 100%

 

[homelite028]

my number is 606-878-6285
Ben Hibbitts

 

[Jacob J.]

Looking for a 385 or 390. . . Can be DOA. Just needs to have the starter, top, and clutch cover, as it will be used to template on fer handles. Edit: Brake handle has to be on it as well.

If you don't want to sell it, perhaps I can "borrow" it in exchange fer something?

How soon are you needing a mock-up? I could send my 385 your way, but I'd need it back by the fall for the Smurf harvest.

 

[sefh3]

Stihl looking for a rear handle, top cover, and intake flange for an 041 Super. The handle setup and cover is not the same as a Farmboss 041.

Anyone!!!! I know someone has a Stihl 041 laying around that they want to part with.

 

[Metals406]

How soon are you needing a mock-up? I could send my 385 your way, but I'd need it back by the fall for the Smurf harvest.

Thanks for the offer mang, but I'd like to get mah paws on something no one will miss fer a while.

A Smurf cutter sounds important. . .

BTW, your new nickname might have to be Gargamel.

SawGarage has one, I think he won't miss fer a while.

 

[tbone75]

Looking for a Husky 570 parts saw.Anyone have anything the want to trade or sell?