Swap meet...

[lwn9186]

Quote Originally Posted by lwn9186
In need of a fuel tank and clutch cover for an Dolmar 111. Down to one college student and some cash for trade.

See if you can help this fella out.

Ed......Thanks for the help! Now got the clutch cover......Still need the fuel tank.

 

[tomdcoker]

Stihl 031 carb.

I need a carb. for a Stihl 031. There are two carbs. for it a Walbro and a Tillotson. I what the Tillotson. The numbers are HU3E. PayPal and parts to trade. Tom

 

[Arrowhead]

I need a carb. for a Stihl 031. There are two carbs. for it a Walbro and a Tillotson. I what the Tillotson. The numbers are HU3E. PayPal and parts to trade. Tom

Tom, I was just getting ready to email you. I checked, but no luck on the 031 carb. Sorry.

 

[tomdcoker]

Tom, I was just getting ready to email you. I checked, but no luck on the 031 carb. Sorry.

Thanks for checking Ed. Since I posted the request I have talked to my man in Oxford that I had been trying to get in touch with for several days and he told me he had an 032 with a tillotson carb plus other saws. I plan on going down on Sat. and pick up what he has. Thanks Tom

 

[Mo. Jim]

I need a carb. for a Stihl 031. There are two carbs. for it a Walbro and a Tillotson. I what the Tillotson. The numbers are HU3E. PayPal and parts to trade. Tom

Tom I have two and they read HU51E 326,they are off 031's. I can drop one in the mail if want it.

 

[tomdcoker]

Tom I have two and they read HU51E 326,they are off 031's. I can drop one in the mail if want it.

Let me check out the one on the 032. If it want work or is not rebuildable I will get back to you. Thanks Tom

 

[showrguy]

any of you husky guys got a coil for a 455 rancher layin around ??
trying to help out a friend, his saw lost spark, plug good, switch seems good ?? anywhere else to look other than coil ??
thanks, chuck

 

[Saw Dr.]

Alrighty I am in seroius need of a stihl 056 ave SEM ignition module. Doing a rebuild for a coustomer and am on the hunt for one. I have the other sem parts just need the ignition coil assembly. And i gots cash...
Also in need of a husky 55 gas cap.

You can still get that ignition from Stihl. Your customer will need to pony up some $$$. There are quite a few 1115 series saws on the sidelines due to ignition. Working ones are not cheap or terribly easy to find. Not many people here are going to let go of one so someone else can make $.

 

[nmurph]

Looking for a 570 or 575 cylinder or piston/cylinder.

 

[tbone75]

any of you husky guys got a coil for a 455 rancher layin around ??
trying to help out a friend, his saw lost spark, plug good, switch seems good ?? anywhere else to look other than coil ??
thanks, chuck

Just might? I will go look in a few.

 

[Warped5]

Still lookin' for a Shinny 488 chain catcher, folks!

TIA!

 

[vw_motorsports]

Stihl coil

I need a coil for a BR600 blower, have cash and some parts...please PM

 

[Mo. Jim]

I need a useable air filter cover for 066 mag,part #1122-140-1002. Cash or trade

 

[MechanicMatt]

Looking to move a old Echo 302 in craftsman yellow..................................

 

[Nardoo]

Looking for a 570 or 575 cylinder or piston/cylinder.

Neal, I have a 575 p/c set. I believe it has about 2 minutes run time. it was replaced as one of the cooling fins had broken off and the owner claimed a new set under warranty. The broken fin is not a problem s far as I can see. You were mighy kind organisng that Solo slug for me - I guess i can part with it.

Al.

 

[nstueve]

I've got some stihl 034/036 parts to trade/swap.

Crank case w/crank
brake handle
2 flywheels

might have a few other bits... Just let me know! interested in Stihl and Dolmar stuff but open to about anything...

PM me if your interested!

I need a 046 intake neck assembly and the throttle linkage.

 

[Eccentric]

In case you missed it....

I've got some stihl 034/036 parts to trade/swap.

Crank case w/crank
brake handle
2 flywheels

might have a few other bits... Just let me know! interested in Stihl and Dolmar stuff but open to about anything...

PM me if your interested!

I need a 046 intake neck assembly and the throttle linkage.

Hiya Nathan,

Do you still have that Jonsereds kill switch that we talked about earlier? My 621 has moved on to another member here, and he's looking for a kill switch for it.

Bumped this up in case you didn't see my post earlier Nathan.

 

[thomas1]

Anyone in the market for a 7900? Pics later.

Decent shape, runs well, clutch cover has a crack, standard filter set up.

Slight crack in the rear handle, where it meets the tank on the bottom. You can barely see it in the pic, but I don't want anyone to be surprised.

 

[nstueve]

Slight crack in the rear handle, where it meets the tank on the bottom. You can barely see it in the pic, but I don't want anyone to be surprised.

Pm'ed

 

[Arrowhead]

Needing a Shindaiwa 345 coil. :help::help::help:
Got trade material.