Time for a little Christmas Giving

[redray46]

How about you just PM him your phone number Red???

Smokey figured it out.

 

[nstueve]

To fill in everyone JJ and psuiewalsh, tbone and some others posted up 034 parts on the "other" sites christmas giving thread. I decided to collect all the 034 parts up, and make a saw for a family-in-need this christmas. That way everyone's charity goes a little further. This is the latest from the "other" thread... If any of you are feeling charitable and have any of the parts needed or would like to contribute please let me know.


Perfect that narrows us down to just a few things.

1.) Muffler (I can get an AM muff cheap if need be)
4.) brake handle5.) rest of brake guts
6.) anyone want to donate a nice bar? I don't have any nice 18"-20" bars. Think the clutch drum is 3/8?
8.) Anyone want to donate a 46mm piston?

Rebuilding saws for charity is one way I like to give back this time of year. However, I can't support the whole parts bill and time.

I can get 1, 4, 5 carb kit and seals kit for about $45 from my AM parts supplier. A good Episan piston for this saw will also be about $41(ebay). Bar, another $40 i'm sure...

IF anyone would like to contribute to this project but don't have any of the parts needed... I'd take donations via paypal. Even $5-$10 from several people can really lighten the load. Anyone who has donated I will mention when I do the build thread. Thanks!

Cheers,
Nate

 

[redoakneck]

So you need a 3003 mount 3/8 pitch bar and chain, prefer 18"-20"??? I know I have a 16, let me see if I have anything longer.

Pete

Do the mufflers off an 031 fit that saw??? If so I prolly have an old ugly??

 

[blsnelling]

I have a well used 20" that I can donate. I'll dress and square the rails. If wanted I could paint it as well.

 

[David Young]

To fill in everyone JJ and psuiewalsh, tbone and some others posted up 034 parts on the "other" sites christmas giving thread. I decided to collect all the 034 parts up, and make a saw for a family-in-need this christmas. That way everyone's charity goes a little further. This is the latest from the "other" thread... If any of you are feeling charitable and have any of the parts needed or would like to contribute please let me know.


Perfect that narrows us down to just a few things.

1.) Muffler (I can get an AM muff cheap if need be)
4.) brake handle5.) rest of brake guts
6.) anyone want to donate a nice bar? I don't have any nice 18"-20" bars. Think the clutch drum is 3/8?
8.) Anyone want to donate a 46mm piston?

Rebuilding saws for charity is one way I like to give back this time of year. However, I can't support the whole parts bill and time.

I can get 1, 4, 5 carb kit and seals kit for about $45 from my AM parts supplier. A good Episan piston for this saw will also be about $41(ebay). Bar, another $40 i'm sure...

IF anyone would like to contribute to this project but don't have any of the parts needed... I'd take donations via paypal. Even $5-$10 from several people can really lighten the load. Anyone who has donated I will mention when I do the build thread. Thanks!

Cheers,
Nate

You need to work on your counting.

happy to see you pulling this together.

David

 

[nstueve]

So you need a 3003 mount 3/8 pitch bar and chain, prefer 18"-20"??? I know I have a 16, let me see if I have anything longer.
Pete
Do the mufflers off an 031 fit that saw??? If so I prolly have an old ugly??

No they don't 034/036/360 mufflers only. I can get a china muff for $8 so it's not one of the big items.

I have a well used 20" that I can donate. I'll dress and square the rails. If wanted I could paint it as well.

As far as the bar goes... I honestly don't have a single 18-20" bar in my whole shop right now... 16's and 24's but no D025 18's or 20's. Just wanted something nice for the new owner so they don't have to replace for a couple seasons at least... Kinda feel like a jerk if I give a saw away that will need replacement parts right away. That's really my only stipulation. I have several people PMing on donations so who knows maybe I can get them a new one! LOL... Let me know what you guys find...

You need to work on your counting.
happy to see you pulling this together.
David

No counting errors; the list was longer but I deleted what others have already committed to.



Thanks for the Christmas spirit guys!

 

[LowVolt]

I have a couple nice 20" stihl bars and chains available. I am certainly not trying to upstage anyone else, just letting the community know what I got. I have a nice 3/8 ES bar, 3/8 E bar and .325 E bar. All 20".

 

[LowVolt]

Or if those guys want to donate a bar I could donate a chain. I believe a have a like new 20" loop of RM chain.

 

[David Young]

Or if those guys want to donate a bar I could donate a chain. I believe a have a like new 20" loop of RM chain.

ok now your just showing off.

captain of the showboat.....

 

[nstueve]

I have a couple nice 20" stihl bars and chains available. I am certainly not trying to upstage anyone else, just letting the community know what I got. I have a nice 3/8 ES bar, 3/8 E bar and .325 E bar. All 20".

20" 3/8 sounds nice to me... Show me pics guys. We'll have a bar beauty contest. LOL!

ok now your just showing off.
captain of the showboat.....

So you're saying he's Charles Winninger or Joe Brown???

 

[David Young]

20" 3/8 sounds nice to me... Show me pics guys. We'll have a bar beauty contest. LOL!


So you're saying he's Charles Winninger???

lots of people don't realize that,
here is a picture of Rory

 

[nstueve]

what about ???

 

[Philbert]

Thank you for the items received. I dug and found a few, eclectic things to offer.

Bar # 1 *** (heading to kyle1!) ***
Oregon 18", 3/8" low Profile, .050 gauge, 60 drive links, A095 mount.
New, never used. Sprocket nose, 19.5 inches overall, 1# 5 oz.
Model 180SDEA095




Bar # 2
Oregon 20", .050 gauge, ? drive links, D096 mount.
Banana Bar!!! ProAm sprocket nose, 22.5 inches overall, 2# 6 oz.
Surface rust. Should be filed, sanded, and painted. Best for display/show-&-tell?
Model 200SKDD096





Genuine Peavy brand peavy/cant/timber jack hook. *** (heading to kyle1!) ***
Approximately 12" X 5" with 7/8" hole.
Forged from 9/16" X 5/8" stock. 1# 9oz.
Was never used, but received in rough condition. Spent some time cleaning it up. Could still use a final sanding and paint.



Genuine Tree Machine Bar Vise/Clamp prototype! *** (heading to juttree!) ***
See: http://www.arboristsite.com/community/threads/tree-machine-filing-clamps.240030/page-5
4" C-clamp. 2# 13oz. 10" X 6" overall.




Each item offered for the cost of shipping. Cash or USPS money order (sorry, I don't have PayPal).
Please send me a PM with your real name, screen name, and mailing address to request an item.

Happy Holidays!

Philbert

 

[DexterDay]

Thank you for the items received. I dug and found a few, eclectic things to offer.

Bar # 1
Oregon 18", 3/8" low Profile, .050 gauge, 60 drive links, A095 mount.
New, never used. Sprocket nose, 19.5 inches overall, 1# 5 oz.
Model 180SDEA095

View attachment 385206
View attachment 385212

Bar # 2
Oregon 20", .050 gauge, ? drive links, D096 mount.
Banana Bar!!! ProAm sprocket nose, 22.5 inches overall, 2# 6 oz.
Surface rust. Should be filed, sanded, and painted. Best for display/show-&-tell?
Model 200SKDD096

View attachment 385208
View attachment 385213


Genuine Peavy brand peavy/cant/timber jack hook.
Approximately 12" X 5" with 7/8" hole.
Forged from 9/16" X 5/8" stock. 1# 9oz.
Was never used, but received in rough condition. Spent some time cleaning it up. Could still use a final sanding and paint.

View attachment 385209

Genuine Tree Machine Bar Vise/Clamp prototype!
See: http://www.arboristsite.com/community/threads/tree-machine-filing-clamps.240030/page-5
4" C-clamp. 2# 13oz. 10" X 6" overall.

View attachment 385211


Each item offered for the cost of shipping. Cash or USPS money order (sorry, I don't have PayPal).
Please send me a PM with your real name, screen name, and mailing address to request an item.

Happy Holidays!

Philbert

That clamp is slick!! I like that a lot.

(Not claiming it.. Just stating my opinion).

 

[LowVolt]

I will get some bar pictures up later this evening.

 

[woody067]

got my chains in the mail today from fearofpayment. thank you so much, merry xmass

 

[DexterDay]

Everything I have is going out tomorrow. . Sorry for the delay. .

 

[cobey]

Thanks Scott (08F150) I got the chains thursday night on the way to
go to the fire wood cutting gtg at treemonky's in WI , I got home late last night
im gonna find some stuff to put in soon

 

[Jon1212]

To fill in everyone JJ and psuiewalsh, tbone and some others posted up 034 parts on the "other" sites christmas giving thread. I decided to collect all the 034 parts up, and make a saw for a family-in-need this christmas. That way everyone's charity goes a little further. This is the latest from the "other" thread... If any of you are feeling charitable and have any of the parts needed or would like to contribute please let me know.


Perfect that narrows us down to just a few things.

1.) Muffler (I can get an AM muff cheap if need be)
4.) brake handle5.) rest of brake guts
6.) anyone want to donate a nice bar? I don't have any nice 18"-20" bars. Think the clutch drum is 3/8?
8.) Anyone want to donate a 46mm piston?

Rebuilding saws for charity is one way I like to give back this time of year. However, I can't support the whole parts bill and time.

I can get 1, 4, 5 carb kit and seals kit for about $45 from my AM parts supplier. A good Episan piston for this saw will also be about $41(ebay). Bar, another $40 i'm sure...

IF anyone would like to contribute to this project but don't have any of the parts needed... I'd take donations via paypal. Even $5-$10 from several people can really lighten the load. Anyone who has donated I will mention when I do the build thread. Thanks!

Cheers,
Nate

Nate,

PM me a Ship To. I've got a few NOS 18" 3/8 Windsor/ Sandvik Roll Top bars. I can certainly spare one.

 

[lumberjackchef]

Got the 24" duratip today jon1212. Thanks its a nice one! So in return here is what I have to gift. NIB ms200 p/c kit. Only stipulation is that you don't snag it to resell, as it was given to me , but I have not had a need for it as of yet. So I feel I should pass it on if someone else can use it. Send me a pm with your zip and I will quote your shipping... Merry CHRISTmas!!!!