can you post your 044-460 pics here

[Mac B.]

Heres the 044 I cleaned up and sold.

Mac

 

[mdavlee]

I can see the picture on my desktop and the droid. I don't know why it won't show up for you.

 

[MNfarmer]

How about getting a factory DP muffler cover for that nice saw

440/460, 044/046 Dual port cover # 1128 140 0801

I've thought about that TT. I think I'll put one on the one I'm rebuilding now. For the factory DP covers do you have to cut the tabs off the limiters or is there enough adjustment with them on?

 

[rymancm]

Here are some 044 and 460 action shots. All New England except for the Montana fire photo.

 

[Trigger-Time]

I can see the picture on my desktop and the droid. I don't know why it won't show up for you.

I don't know.

I've thought about that TT. I think I'll put one on the one I'm rebuilding now. For the factory DP covers do you have to cut the tabs off the limiters or is there enough adjustment with them on?

I think most need the cut off, it's one of the first things I do to
a saw when I get it. I bought the tool to remove/install the caps


440 and 064

TT

 

[K7NUT]

OK, this is when I got her home, a CL bait and switch!
But I love this saw!

She's cleaned up now, still tweeking on her though!
This is my "small" saw now, but she don't act like it!:hmm3grin2orange:

Sorry, forgot the "now" pics! DUH

How did the 066 get in there!?

 

[jeffbecky1]

CL/Pawn Shop 044 find

I found this saw listed on CL for a pawn shop. Said saw does not run. I bought it for $100 & took it home. Cranks over, compression, took muffler off and piston looks great! Can't wait to get it running!

 

[Stihlman441]

Dry spotted gum

 

[GASoline71]

Not hatin' on your mod there K7... but why would you have the outlets pointing right at the tree? Just curious...

Gary

 

[jeepyfz450]

posted this pic a few times before...... this is the best 046 pic i have

 

[BlackOakTreeServ]

Here's my MS440 mag cutting big vally oak with 32" bar with full skip chain.

 

[wigglesworth]

Here is one of my 044's. This was getting ready for the GTG I had earlier this year.

And another one....

One with an 046 top on it. Its an old vid, and the saw runs a "bit" better now....might make a new vid in a day or so.

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/xp8oGSz4U9M?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/xp8oGSz4U9M?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

 

[woodyman]

Heres one I paid $75.00 for put the BB kit on it and sold.Nice looking and cutting saws.

 

[PLMCRZY]

posted this pic a few times before...... this is the best 046 pic i have

How does she run:hmm3grin2orange:

 

[jockeydeuce]

This was my first 044 (10mm saw).....Ported and muffler modded (My very first porting job). I lent this saw to a good friend and I never saw it again. He just brought me a big stack of $100 bills and told me I better build another one......:hmm3grin2orange:

It pulled well and I only got to run two tanks through it. I was told that it has woke up a bit more even now.

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/Xkza07tPpOw?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Xkza07tPpOw?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

I have built two more 10mm 044's since, that I still have.....This one is a bit prettier.

This one is my extreme budget 044 built from all the leftovers with a cheapo piston and an 046 tank and filter set-up. I'm at a total of about $80 out of pocket on this one.

 

[wyk]

Another PNW 046 mag. 28" Windsor, full comp. Recently had it buried in a 4' Maple, and it cut it like butter with the square tooth chain.

 

[Adirondackstihl]

 

[DexterDay]

Nice!!


An old thread, but I will play along.

Here is my MS 460....




And the one saw I regret selling the most.

Notice the little sticker on the clutch cover and the switch just behind the sticker.

 

[joe25DA]

440 mag. 25"

 

[wyk]

Cool story, Bro.

Here's my 044 not too long ago after it landed on my porch in Ireland from Randy's in the US of A:

Another PNW 046 mag. 28" Windsor, full comp. Recently had it buried in a 4' Maple, and it cut it like butter with the square tooth chain.