Remington Chainsaws(including Mall chainsaws)

[67L36Driver]

 

[happysaws]

Hey all,
I locally acquired a Remington PowerLite 6 chainsaw and recently discovered that it has some problems. It has a massive crack in the crankcase. Now I'm desperately searching for a replacement crankcase and thought I'd put the word out. The part number is 64612. Any help would be greatly appreciated!

P.S. This is my first post, so it might be awhile before I figure out how to upload pics.

 

[67L36Driver]

You are in for a long search. PL/SL-6&7 parts are like rocking horse poop. They share almost nothing with their smaller siblings.

 

[happysaws]

LOL I figured they were made of unobtainium, but thought I'd try anyway. I heard that it might be fixable with titanium putty??
I've got another PL-6, a PL-7A and an SL-7A, so if I cant get this one to run again I guess I'll just keep it for parts for the other 95cc saws.

 

[67L36Driver]

LOL I figured they were made of unobtainium, but thought I'd try anyway. I heard that it might be fixable with titanium putty??
I've got another PL-6, a PL-7A and an SL-7A, so if I cant get this one to run again I guess I'll just keep it for parts for the other 95cc saws.

I don't think it's legal to have that many.[emoji15]

 

[67L36Driver]

I confess I do have an abundance of PL/SL-55's.

 

[happysaws]

Nice looking saws! Here's a list of my Remingtons;
RUNNERS:
Rancher
JD 15
Wards 3.1 [SL-10]
PL-4 (x2)
Wards 4.0 (x2) [PL-5]
PL-5
Wards 5.0 (x2) [PL-55]
PL-55
PL-6B
PL-7A
SL-7A
Super 660
Super 660G
Super 754 (x3)
Bantam
NON-RUNNERS/PARTS
SL-9
SL-4A
PL-4
SL-5 Logmaster (x2)
Super 754 (x3)
Super 770
Bantam
PL-6

That about does it...for now....

 

[67L36Driver]

U B my Remmy collector buddy now.
SL-5R

Post pic of your 660G.

 

[67L36Driver]

Link to my Remington collection.
The Driver's Remington collection.
Well fellow campers it's been over five years ago that I drug two junkers from a shed and was bitten by CAD.

Always a champion of the underdog I chose Remington to collect because they are cheap and I had little competition on evilbay.

The Logmaster heavyweights (literally!).

SL-5R gear drive, GL-7 and Pro 88.

Donated by Kenneth Miller, Mark Heimann and FarmerSteve.

Thanks fellas!

More later.
https://r.tapatalk.com/shareLink?ur...are_fid=1392778&share_type=t&share_pid=134524

 

[happysaws]

SUPER 660G W/ 16 " BAR+ 7/16" chain







PL-6B BOW SAW W/14" BOW + .404" CHAIN

 

[cbfarmall]

Don't think I ever posted this up:

 

[jerrycmorrow]

Found a pretty good looking PL5 in a flea market. No chance to check it out. It was in a HOT back room. Wanted $80 as is. Kinda thinking that's a little ambitious. Whaddayall think?

 

[67L36Driver]

It would have to be a good runner for that.

 

[happysaws]

Found a pretty good looking PL5 in a flea market. No chance to check it out. It was in a HOT back room. Wanted $80 as is. Kinda thinking that's a little ambitious. Whaddayall think?

If it had a nice original roller-nose bar and good paint, maybe...

 

[briantutt]

here is my only Remington. Roller tip bar came on it. Starter needs some help it slips.

Brian

 

[67L36Driver]

I bet I can come up with the rubber rear handle grip and a pair of new friction washers for your starter Brian.

 

[briantutt]

I bet I can come up with the rubber rear handle grip and a pair of new friction washers for your starter Brian.

I have not taken the starter apart but both would be nice!

Brian

 

[67L36Driver]

I'll try to dig that up then.[emoji106]

 

[happysaws]

I'm currently working on the PL-6 w/ the cracked crankcase, I'll post pics of the procedure later. Now I'm looking for the PTO crank seal, and the large, thin O-ring that seals the crankcase as the pieces I have are bad. I believe that the crank seal is the same as the seal in a Bantam or S754. Does anybody have a link to where these parts may be available from?? THANKS!

 

[happysaws]

Found the large O-rings on McMaster Carr, and the crank seal at Bumper to Bumper, so were all set now for a reassembly once the parts get here.