Homie looks just like the one dad had, with a BOW of course. Nice looking saw there David. [emoji106]
Steve Sidwell, Samsung On5 using Tapatalk
Steve Sidwell, Samsung On5 using Tapatalk
Vintage Chainsaw Collectors Lounge
- Thread starter Kensie1988
- Start date
Help Support Arborist Forum:
What's the Black button near the gas cap for?
Steve Sidwell, Samsung On5 using Tapatalk
Steve Sidwell, Samsung On5 using Tapatalk
Oil fill plug with screw in plug next to it. I guess to block off drilled passageway. I still cannot get over this saw--not new old stock but close as I can get. I have and run many xl series but never had 1 with new compression--WOW.
David
David
Kensie1988
Vintage Saw Maniac
That is definitely a Saw I'm jealous of! Great find!View attachment 601736 View attachment 601734 Cad has hit hard this time. Got a super xl auto--Seems to be all original saw--clean-clean-nicest original saw I have ever had-killer compression-runs perfect. DavidPrice--I will never tell--Having and using it and looking at this fine machine--PRICELESS!!!!!
Mac&Homelite
Addicted to ArboristSite
I'd be even jealous of a mini mac right about now. Being away from my tools hurts me, and when I do go home, I have a million other projects so I don't get to work on them. Probably have seen the trading post, but check out this Homelite 450. Someone on here needs it besides me lol. It's got me drooling with that full wrap. I'd need to sell or trade my mac 250 before I could get it though.
http://www.arboristsite.com/community/threads/homelite-450.313220/
http://www.arboristsite.com/community/threads/homelite-450.313220/
Those 120SI's are awesome saws. Great power for a 30 some year old saw.
I use them all the time in my little firewood biz. Got a few hours on one today.
I have three that are set up just like yours with full wraps.
Got a little saw time in today, didn't have the generator at the farm so I had to cut rafters with a chainsaw. Hard to cut by a line, mainly when you got to split a 2x8 down the middle to make a 2x4, dad was 2 short on his count, plus had to cut the posts to the finish height.
Steve Sidwell, Samsung On5 using Tapatalk
Steve Sidwell, Samsung On5 using Tapatalk
Maybe next week if the bottom is dry enough to get the bobcat in, I'll start cutting out the storm damaged trees. Told dad some of it will be fire wood.
Steve Sidwell, Samsung On5 using Tapatalk
Steve Sidwell, Samsung On5 using Tapatalk
Sale that Mac, get the Homie, work on it in the dorm, done told ya how to make a work shop in your room. I still like David's Homie. I'm still curious about that little black button.
Steve Sidwell, Samsung On5 using Tapatalk
Steve Sidwell, Samsung On5 using Tapatalk
LonestarStihl
Addicted to ArboristSite
I have a couple eager beaver style Mac projects. Let me know and I'll mail you one
Mac&Homelite
Addicted to ArboristSite
Need to get it working better before I think of selling it, and even at that I don't think it's going to go for less that $150 with all the new parts on it. Don't worry, I really want the Homie. Anyone want to buy a running (albeit very badly) early 60's Mac 250 so I can upgrade? On another note I'd possibly trade it towards a 90cc class stihl or husky project saw, or purchase a project saw outright.
I'll let you know when I'm that bored. Got some other projects in the pipeline yet and still have 3 saws that need work yet.
Those little saws will make you go bald fast.
Steve Sidwell, Samsung On5 using Tapatalk
Steve Sidwell, Samsung On5 using Tapatalk
Mac&Homelite
Addicted to ArboristSite
Wanna bet! I've been using Matlab the last couple of weeks for school. I'm mostly fine, there isn't much hair left to loose and I've gained a new level of patience. So yeah, I'm ready to tackle a mini-mac. Eager beaver's are a little new for my tastes.
Mac&Homelite
Addicted to ArboristSite
Sorry if my humor is a bit dry tonight. Been a long last couple of days for me with tests and all. Ready for this college experience to be over. I'm not the party type, and with the football game tonight there was no shortage of those going on. After all, who has money to party when you are saving for your next saw purchase? My folks worry some, but I'm all good, you guys help to keep me on the straight path by luring me with all those tantalizing saw finds.
madmarksolomon
Timber Junkie
Hows it fellas, Mark here again with a couple of ??? Earlier this month I bought a McCulloch 1-53 and told you guys I would keep you posted, so here goes.
Could not get the old girl lit, diagnosis compression 70psi, so decided to go do complete tear down, cylinder a little rough but a light hone job should do the trick, coil, points, condenser all good shape, reed valve looks good, will replace all gaskets, o-rings etc, manual oil pump a little rough new o-rings should do the trick, besides the cylinder and piston it's in good shape.
So here is the question,
Uncaged Needle bearings I hate uncaged needle bearings especially on the main!!!! So years back when I was a young lad I was taught to install needle bearings with grease to contain them. Is this the proper way to install in a saw or do you fellas have a better way?
As always your advice is much appreciated.
Mark
P.S.
Will send pics during reassembly.
Could not get the old girl lit, diagnosis compression 70psi, so decided to go do complete tear down, cylinder a little rough but a light hone job should do the trick, coil, points, condenser all good shape, reed valve looks good, will replace all gaskets, o-rings etc, manual oil pump a little rough new o-rings should do the trick, besides the cylinder and piston it's in good shape.
So here is the question,
Uncaged Needle bearings I hate uncaged needle bearings especially on the main!!!! So years back when I was a young lad I was taught to install needle bearings with grease to contain them. Is this the proper way to install in a saw or do you fellas have a better way?
As always your advice is much appreciated.
Mark
P.S.
Will send pics during reassembly.
astnmacgto
Carnac The Magnificent
That's what I would use, or tranny assembly lube, it's like a wax type consistency with a low melting point, heat it up and it gets fluid like then smear it on the needle bearings and put them in place. It would melt right out and burn up the first time you use it.
madmarksolomon
Timber Junkie
Thanks for the info. I figured it would be ok just checking, cause I've never done needles on a main and a 2 stroke at that, just the occasional gear box over the years.
astnmacgto
Carnac The Magnificent
As long as it is regular petroleum based grease it should blend with the fuel. One way you could check would be to take some of the grease you are using and mix it with some gas, as long as it dissolves when you stir it up it should be fine
Tranny assembly grease or Vaseline, both work better than regular grease.
Steve Sidwell, Samsung On5 using Tapatalk
Steve Sidwell, Samsung On5 using Tapatalk
Get you a syringe and put the lube in it, lay you a beed across the rod and cap, lay the needle bearings in place, then assemble. Put the syringe up for your next bearing job.
Steve Sidwell, Samsung On5 using Tapatalk
Steve Sidwell, Samsung On5 using Tapatalk
