manual
Addicted to ArboristSite
LOL, call me when your tank housing is twisted to far on that husky
And I'll call you when that happen to My sthil.
Oh thats right I already did. LOL
Alittle Stihl vacation
- Thread starter THALL10326
- Start date
Help Support Arborist Forum:
LOL, call me when your tank housing is twisted to far on that husky
And I'll call you when that happen to My sthil.
Oh thats right I already did. LOL
THALL10326
The Champ
I agree, it works just fine, wait a minute we're suppose to be at war here, grrrrrrrrr. Also are you in ghost mode, you can't hide from me,hehe
THALL10326
The Champ
But did it leak gas afterwards,hahahaha
THALL10326
The Champ
I have derailed a chain once on the 361, and it sure did damage the plastic around the clutch.
I have on my 353 also, no damage, except for scratches on the chain catcher, and the paint on the clutch cover......
Bottom line; Husky puts metal were it really makes a difference, Stihl puts it where it looks good........
Speaking of looking good, why is this on the side of the 372 motor instead of on top where it belongs,hmmmmmmmmm,
Last edited:
THALL10326
The Champ
I can reach that one with my hand on the handle where it belongs, nit picky are we, hell yes, all in fun of course but point made.
Last edited:
manual
Addicted to ArboristSite
If I was throwing my saw around like that saw was, It would leak too.
- Joined
- Apr 3, 2002
- Messages
- 6,074
- Reaction score
- 606
How interesting this thread has become!!!
Getting down to the nitty-gritty of saw design I see.
Tom............I have both the 441 and the 372...........I like'em both a lot.
IMO...........both saws will last because I maintain the hell out of them.
Am I typical..........prolly not.
But for my purposes all this comparing is moot!
Getting down to the nitty-gritty of saw design I see.
Tom............I have both the 441 and the 372...........I like'em both a lot.
IMO...........both saws will last because I maintain the hell out of them.
Am I typical..........prolly not.
But for my purposes all this comparing is moot!
THALL10326
The Champ
Ok Troll I've been holding out on ya
Heres where the beef is on the 441, look close.
Heres where the beef is on the 441, look close.
Last edited:
manual
Addicted to ArboristSite
Speaking of looking good, why is this on the side of the 372 motor instead of on top where it belongs,hmmmmmmmmm,
What do you Mean ?
That is where it belongs on a Husky.
Want To talk about plug placement.
In referance to where it fires ?
Lakeside53
Stihl Wrenching
That's just abuse! Never have seen one of those worn out on any pro stihl, and they all use the same screw/worm
Last edited:
THALL10326
The Champ
Hold a 372 in your hand and see if you can reach the compression with your thumb, NO, on the 441 you CAN. Plug replacement on the 441 takes me about 30 seconds, maybe 15 on the 372 but only once every few years so blahhhhhhhhhhhhhhhh
SawTroll
Information Collector
Tom and me just need something to quarral about, no offence intended on either side.......:yoyo: :yoyo:
THALL10326
The Champ
There is nothing but a hollow space. The carb moves all around on that boot. Not a bad thing at all but built like the 441, no.
Last edited:
manual
Addicted to ArboristSite
Oh sorry I thought the MS361 was a Pro Sthil.
THALL10326
The Champ
Thats right Sawtroll. Your one guy I can torment and get torment from you and we both smile, we disagree the best,
Those two saws I could run for years and years and never have a issue. 99% of all saw failures are the operator or neglect. Take Manual for instance, his 361 bushings were completely wore out, yet he piddled around and didn't replace them, bout tore a hole in his gas tank, his FAULT(got that Manual, hehe) Either of those two saws pictured would hold up just fine with a good operator behind the trigger. They both cut good, both run good, both are smooth and both I LIKE.
manual
Addicted to ArboristSite
whats so hard about reaching the compression release on the side.
with your left hand.
Think safty tom you always want your right hand fully closed holding on to the saw handle. ehh
- Joined
- Apr 3, 2002
- Messages
- 6,074
- Reaction score
- 606
THALL10326
The Champ
Alright you orenry heathen tell the truth here. Did you buy it new or did you buy it off that guy that tears up everything he gets his hands on, the guy who ran over a few saws, hmmmmmm. That 361 done cut 43 million cords of wood before you bought it, admit it,LOLOL
manual
Addicted to ArboristSite
Again, your telling me , you would rather have a carb solid mounted
so the boot cracks
THALL10326
The Champ
Grrrrrrrrrrrrrrr if you hold the saw handle in your left hand with the right hand on the trigger you must have the longest thumb on your left hand the world has ever seen,:hmm3grin2orange: :hmm3grin2orange:
