028 Case Gasket

[blsnelling]

Where can I get one? I ordered the OEM gasket set and it's NLA. I then order individual gaskets and now the case gasket is either NLA or on back order. I've looked online for an aftermarket gasket and can't even find that. I really don't want to make my own. Any help would be appreciated.

 

[hanniedog]

Couple sets on ebay if they have what you need.

 

[blsnelling]

I saw those. Awful pricey, especially when I only need the case gasket.

 

[hanniedog]

That's is what I figured. What ya working on.

 

[blsnelling]

I bought a 028 Super to flip, thought it was in great shape only to find out it wasn't.

 

[hanniedog]

At least you have the ability to fix it.

 

[PogoInTheWoods]

You could have made a few of em in the time it's taking you to avoid doing so.

 

[blsnelling]

This is true!

 

[Tml061583]

What do you make them from? I'm working on the same saw. Regular gasket paper? Where can I get crank and rod bearings and what brand is best?

 

[Mad Professor]

Oh, $#!t !

I knew I should have ordered a set for repairs.

Are seals still available?

 

[brandonstc6]

Crank bearings and seals are still available. I used a 026 clutch side bearing in my 028 build. Do not use the Chinese bearings, the clutch side bearing is too small for the stock seal.


Sent from my iPhone using Tapatalk

 

[Hdtoolmkr765]

I've got a box full of partial gasket sets, let me check and see if there is one in there.

 

[blsnelling]

I've got a box full of partial gasket sets, let me check and see if there is one in there.

Thank you, but I have one on the way.

 

[Tml061583]

Bearings, seals and gaskets are still available from stihl. Ordered some this morning!

 

[Tml061583]

What tool do I need to remove cylinder bolts?

 

[brandonstc6]

What tool do I need to remove cylinder bolts?

T27 Torx. Some of the cylinders have small holes in the fins. I have had to enlarge the holes before to use a t27 screwdriver.


Sent from my iPhone using Tapatalk

 

[Tml061583]

Thanks

 

[Hdtoolmkr765]

Thank you, but I have one on the way.

Good thing, I've got 4 028 partial sets and all of them are missing the case gasket.

 

[Tml061583]

Can anyone tell me if I can interchange crankshaft assembly part#1118 030 0401 and part# 1118 030 0403?

 

[HarleyT]

Can anyone tell me if I can interchange crankshaft assembly part#1118 030 0401 and part# 1118 030 0403?

Where are you getting these part numbers?