066 stalls when hot

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
stihlatit said:
At long last my 066 is cutting again. I picked it up from the shop today. They pressure tested it and found no leaks. She got a clean bill of health. Impulse line and carburetor passed as well. I must have smoked that piston on a combination of a very hot day and set a little to lean as the saw came from the mountains and I am in the valley. Anyway I fired it up tonight and she works great. Better than ever. Lots of instant power on the throttle. I put a aftermarket piston and cylinder on it. I got it from Kafar on Ebay. The set lookedgood and the sawperforms great. Seems to be a good aftermarket kit. He claims to have quite a few out there and at a 0% failure rate. I hope he is right.:clap: :clap: :clap: :clap: :clap:


Yippie!!!!!!


Stay away from the edge with your tuning...
 

Latest posts

Back
Top