346 husky 28in bar Question

[sunfish]

I have no use for a bar over 20", but that's just me. If a long bar on a small
saw works for the user, that's great! I sure wouldn't get on here and insult
folks for doing it.

There are a few (very few) on this site that will trash Husky and the 346xp
almost every time it comes up. Had the OP wanted to put a 28" bar on a 026,
it'd be all flowers and sunshine... lol

 

[Gypo Logger]

In all honesty fella's a 28" bar on a 346 is about as gay as it gets. The only saw that's got any business running a 28" bar is a 385 or an 066.
John

 

[bookerdog]

In all honesty fella's a 28" bar on a 346 is about as gay as it gets. The only saw that's got any business running a 28" bar is a 385 or an 066.
John

Way to stir it up gyp

 

[bookerdog]

In all honesty fella's a 28" bar on a 346 is about as gay as it gets. The only saw that's got any business running a 28" bar is a 385 or an 066.
John

Way to stir it up gyp. I thought a 385 could only run a 20 but only if its skip chain

 

[Gypo Logger]

Way to stir it up gyp

Lol, glad you jumped in, but can you imagine the 28 incher trying to do the do unless you were 8" tall and using the tip due to the "backache Barney" syndrome?
The long barer's like to look macho to the casual observer. It's all just perfuctory stuff. Much better to be teased with a small bar on a big motor and outcut them all. You'll get the last laugh.
John

 

[bookerdog]

Lol, glad you jumped in, but can you imagine the 28 incher trying to do the do unless you were 8" tall and using the tip due to the "backache Barney" syndrome?
The long barer's like to look macho to the casual observer. It's all just perfuctory stuff. Much better to be teased with a small bar on a big motor and outcut them all. You'll get the last laugh.
John

Ya need to put that 14 inch on and work in the L position. Would make my manhood feel better to. LOL Its good to see you on here again. I have been away for awhile as well. Bet on who makes it to banned camp first. LOL

 

[teatersroad]

Lol, glad you jumped in, but can you imagine the 28 incher trying to do the do unless you were 8" tall and using the tip due to the "backache Barney" syndrome?
The long barer's like to look macho to the casual observer. It's all just perfuctory stuff. Much better to be teased with a small bar on a big motor and outcut them all. You'll get the last laugh.
John

You have a knack with metaphors.

 

[Gypo Logger]

You have a knack with metaphors.

So does this mean you won't be running a 28"er on your Dolmar 111? Lol
Looking for parts for 111, I think that saw rocks.
An 066 wearing a 16"bar and 8T is something to behold. Tell me you don't like it! Lol
John

 

[Gypo Logger]

I've seen that longbar sydrome many times. Certified faller with stock 365's running 28" bars cutting 12" wood, it was all for looks. I could and did cut circles around them. Let them sit on a freakin stump and I'll dump the wood! What a cocky bastid aye! Lol I know I was going too fast, but I'll be damned if any run of the mill woodtick will out cut me!
John

 

[bookerdog]

I've seen that longbar sydrome many times. Certified faller with stock 365's running 28" bars cutting 12" wood, it was all for looks. I could and did cut circles around them. Let them sit on a freakin stump and I'll dump the wood! What a cocky bastid aye! Lol I know I was going too fast, but I'll be damned if any run of the mill woodtick will out cut me!
John

Them there were certified faller. Dang. My wife ran after me one time with my stock 365 trying to cut 12inch wood.

 

[WyoRanchHand]

Seems to me that a 346 with 28" bar would be the thing for thinning.

 

[mowoodchopper]

Okay tell me why then. So no you didn't think before you typed. So before you go making your DA statements think alittle. Now go do your weekend warrior thing and bug someone else.

First of all if anyone's a weekend warrior, Im talking to him! And second your so full of #### its amazing. And you got the big mouth to go with your lame ass ideas, to bad you dont have any common sense. Im sure next you'll argue that husky was wrong by not recommending a 28 inch bar on a 346!

 

[bookerdog]

First of all if anyone's a weekend warrior, Im talking to him! And second your so full of #### its amazing. And you got the big mouth to go with your lame ass ideas, to bad you dont have any common sense. Im sure next you'll argue that husky was wrong by not recommending a 28 inch bar on a 346!

LOL little man. You still can't even say what the saw is used for. You are the the biggest weekend warrior I have ever seen. I just love your common sense comebacks LOL ahhhhhhhhhhh you got a big mouth man. LOL

Wind it up little boy you playing with the big boys. LOL DA

 

[parrisw]

I guess a guy is entitled to put whatever size bar on whatever motor they want, however, it does come done to efficiency, speed and production.
The majority don't care about these factors as most of their cutting is more recreational than commercial.
All of us can admit to using the wrong tool for the job whether its a saw or a hammer.
John

LOL John, why did you put some of your Viagra in the gas tank?

 

[parrisw]

LOL little man. You still can't even say what the saw is used for. You are the the biggest weekend warrior I have ever seen. I just love your common sense comebacks LOL ahhhhhhhhhhh you got a big mouth man. LOL

Wind it up little boy you playing with the big boys. LOL DA

I like your saw booker. I think it ran it just fine, don't know what the problem is with these guys?

Hey you want to send me one of them 346's? Surely you don't need that many.

 

[mowoodchopper]

LOL little man. You still can't even say what the saw is used for. You are the the biggest weekend warrior I have ever seen. I just love your common sense comebacks LOL ahhhhhhhhhhh you got a big mouth man. LOL

Wind it up little boy you playing with the big boys. LOL DA

Im playing with a ass hole is what Im playing with, and if you think Im little
your welcome to come visit. As for weekend warrior how many do you know who burn a 55 gallon drum of mix through their saws between my tree service and heating the home each yr? I got to tell ya though your really easy to mess with you must have low self esteem! It is fun though.:biggrinbounce2:

 

[bookerdog]

Im playing with a ass hole is what Im playing with, and if you think Im little
your welcome to come visit. As for weekend warrior how many do you know who burn a 55 gallon drum of mix through their saws between my tree service and heating the home each yr? I got to tell ya though your really easy to mess with you must have low self esteem! It is fun though.:biggrinbounce2:

Yes I bet you do like to play with ass holes. I have heard you like to play around that area. You still can't understand thats okay don't worry about it. If you get a clue come on back.

I love the big man act I burn 55 gallon drum LOL. O yes priceless the low self esteem. Your not even a fly on my butt since thats where you like to hang out. Nice try though.:newbie:

 

[Zombiechopper]

stop flirting you two

 

[parrisw]

Yes I bet you do like to play with ass holes. I have heard you like to play around that area. You still can't understand thats okay don't worry about it. If you get a clue come on back.

I love the big man act I burn 55 gallon drum LOL. O yes priceless the low self esteem. Your not even a fly on my butt since thats where you like to hang out. Nice try though.:newbie:

ha ha ha ha ha ha ha ha ha ha.

Man I'm glad your back, I haven't had this many good laughs since you've been gone.!!

 

[056kid]

So mowoodchopper, you are telling us you burn 2,750 gallons of saw gas to run a tree business and heat your home?

thats what a 55 gallon drum will do if my math is right. . .