357xpgw

[SWE#Kipp]

Yes I hope so ,,,,,
if it's a mahle cyl and NOT stratocharged it got the possibility's to be decent saw I think ,,

 

[Mr_Brushcutter]

I looked on the IPL for the 357 but i can't find the full rap handle. did you make it or is a new model?

 

[SWE#Kipp]

It's not at the bottom of the Ipl somewhere in the middle !!
brows it slowly and you will see it

 

[manual]

I can't wait to hear about the new 346xp.

 

[manual]

357xp

Full wrap P/N's
544 34 92-01
544 34 92-02 (G)

Double dogs P/N
544 28 38-01

 

[SWE#Kipp]

It's the same as the old 346 except it's got a bigger bore 50.1cc and a primer bulb , power is 2,7kw approx 3,7hk Mahle cylinder

 

[blis]

It's the same as the old 346 except it's got a bigger bore 50.1cc and a primer bulb , power is 2,7kw approx 3,7hk Mahle cylinder

Man, what a let down, esp that primer bulb...

 

[SWE#Kipp]

whats wrong with a primer buld blis ??

 

[SawTroll]

It's the same as the old 346 except it's got a bigger bore 50.1cc and a primer bulb , power is 2,7kw approx 3,7hk Mahle cylinder

Sounds very good for a saw that light - unless the weight also have increased.........

What's the max rpms?

 

[SWE#Kipp]

Don't know the max Rpm yet, but will tell as soon as I find out !!
But here is some more pics of it ,,,

 

[Austin1]

That's a good looking saw to bad the handle is bent

 

[SawTroll]

Don't know the max Rpm yet, but will tell as soon as I find out !!
But here is some more pics of it ,,, ....

Ouuuuccch - hopefully it will be availiable without the TAC......

 

[pbtree]

Excellent saw - I like the full wrap as well...

 

[SWE#Kipp]

Ouuuuccch - hopefully it will be availiable without the TAC......

It is

 

[manual]

Interesting chain cover color, Does the new 346XP have the cat muffler?
Never mind I see the Green cap.
So why don't you have the Euro Muffler on that saw ?

 

[Urbicide]

I could not help but to notice the Husky's higher position over the Stihl as illustrated in the pics in post #50. opcorn:

 

[manual]

I could not help but to notice the Husky's higher position over the Stihl as illustrated in the pics in post #50. opcorn:

 

[pbtree]

I could not help but to notice the Husky's higher position over the Stihl as illustrated in the pics in post #50. opcorn:

It is the natural order...

 

[SawTroll]

That's a good looking saw to bad the handle is bent

It is less bent than a Jred one - it even is a bit lighter, as the total length of tubing is less....

 

[SawTroll]

Interesting chain cover color, Does the new 346XP have the cat muffler?
Never mind I see the Green cap.
So why don't you have the Euro Muffler on that saw ?

My guess (so far) is they used the added ccs partly to increase power, and partly to make it more emissions friendly - but it is just a guess....opcorn:

Hopefully they rename it (like 349xp) before it hits the market, to avoid confusion.