It would fall right between you selling it to me and you selling it to me.
BEST 60cc saw ever built !!!!
- Thread starter mowoodchopper
- Start date
Help Support Arborist Forum:
I don't think I've seen any mention of the MS400 C-M yet? 66cc's if I remember correctly.
aarontriton
ArboristSite Lurker
I agree 361 with muffler mod is a great saw. Been my go-to saw I bought new in 2004 I have a lot of maintenance free tanks of fuel through it. Still going strong that being said my new ms400 feels just as light and is more powerful hope it lasts as long.
Sent from my Pixel 6 using Tapatalk
Sent from my Pixel 6 using Tapatalk
Doubtful
aarontriton
ArboristSite Lurker
Lol I remember the same being said for my 361
Sent from my Pixel 6 using Tapatalk
Sent from my Pixel 6 using Tapatalk
Yeah I'd have to agree, especially considering there's generally not much weight difference between them. Fuel consumption could be a factor but even then It's marginal depending on how far apart they are in CC.
The 60CC class has always been a bastard size IMO. They are good for the guy with only one saw.
I ran my stock 361 and 262 side by side one day in a nice dry ash log (probably a 16-18" log). Both had 20" bars with new EXL chain. They were neck and neck, but the 262 ended up winning by about 1 second on the third cookie, IIRC.
Both are awesome saws, and I miss both of them. Can't keep'em all unfortunately, unless I want to live alone
I would agree, these two are some of the best 60cc saws made.
I've also heard the 562 is a pretty awesome saw. Ugly, but good.
MAMU2
Fog Larks abide
Maybe you might come around to a different opinion with a few more years of thinking, which, inevitably will be accompanied with growing hurt as you get out of bed every morning, the longer you think about it the more pain is likely. I am 62 and have been getting in fire wood for every one of the last 38 winters. Our winters are fairly mild here in northern Ca. but the topography, at least where I live is rather extreme. We get by with 4 to 5 cords of hardwood. For 20 years I was a one saw guy. The old 353 was totally reliable it had a 20" bar, in any kind of oak over 12" dia. it was slow and then slower. I bought a Dolmar 6100 and put a 24" bar on it. Eventually, I got wise to the fact that 12+" hard wood and 20+" soft wood should be milled into lumber and not shoved into a wood stove, so I bought a 36" Grandberg mill and 390xp. For a while I was going out for fire wood with all 3 saws. The 6100 with a 24" bar was an under achiever, the 390xp with a 24" bar was a monster and I would break it out as long as the log was laying on the road. Then 2 years ago I scored a lightly used 359 at a garage sale, I took the 24"x 3/8" bar it came with off and replaced it with the new 20"x .325" bar I had recently bought for the 353, along with a 9 pin rim sprocket. I bought a new Tsu-mura 18" bar for the 353. Both saws work way better with shorter bars and in the 359's case, lighter chain and higher chain speed. It soars through 14" oak with a sharp LPX chain. So now the 390xp stays at home bolted into the mill, the 6100 powers the Lewis winch. And the brand new 572xp I bought for the edging mill, comes along with us and a 24" bar, but usually remains in the truck, because the 359 just rips and is nearly 3 lbs lighter.
Old thread but after running just about everything out there and not being impressed
I went back to the 2 series which is a 60cc chassis
Ported 266 all day long.
I went back to the 2 series which is a 60cc chassis
Ported 266 all day long.
MAMU2
Fog Larks abide
Nice, my point was that any 60cc saw with a 20"x .325" bar and a well sharpened chain, Echo, Stihl, Husqvarna, Jonserd, what ever, will outperform any 70cc saw in terms of fatigue prevention, with 14" dia. hardwood, softwood or candy canes. to say a 60cc saw is not worth owning is both pointless and stupid. Maybe I'll get my old dysfunctional 3120 built in1986, running soon and I'll, be able to address the inadequate nature of every saw smaller than 100cc.
2017, not 1986, and definitely Not Dysfunctional
Doug
Doug
Tigwelder83
ArboristSite Operative
Call me the odd ball... I own a pair of 359's, a pair of 550xp's, ran a host of stuff... in this class the saw to beat is the stihl ms400c... hands down. More hp, great on fuel. What's not to love??
14" wood to me is 50cc saw territory.
And your fatigue comment depends greatly on what saws we are talking about.
Ported…….Brad posted a video. And just posted a video with a 3/4 wrap setup
Will probably have a 28” cannon light
Chain size is still under study
gwat
ArboristSite Lurker
400c is a mean saw stock.
