CL find, old husky carcases. Help with ID

[Sawdustmaker]

Hey guys, i have not really been around for the last year, had a lot of other stuff going on but i still check craigslist and i still get hits. today after church i went to get this pile of crap. $40 later i have a carport full of saws that not being stihls i am not knowledgable about. i can read 1100 CD on on of them and i have seen saws of this vintage before but at the momenti dont know what this stuff is and dont really care. i am not planning to keep any of it. what of it yall dont want goes to ebay or the trash. my guess is that the recoils and gastanks are worth somethin but not much else. the pictured cylinders appear usable.
can i get some info?
thanks, i miss hanging out here, its been too long

 

[Freehand]

You gots some old big husky in there.288?2100 cd?

Good to see ya again,Dustmaker......

 

[Freehand]

You might have a 298 in there too........get out the calipers and measure some bores for us........

 

[Saw Dr.]

You might have a 298 in there too........get out the calipers and measure some bores for us........

Yeah, and then send me all the 54mm and 56mm ones.

 

[Sawdustmaker]

52mm on everything i measured except one jug that was 56mm. is the 281 52mm?

 

[Sawdustmaker]

from what i can gather, ive got a couple of 170 CDs, a 168 se, a 288 or two and some parts of a 1100 CD, and prolly more.

 

[Saw Dr.]

52mm on everything i measured except one jug that was 56mm. is the 281 52mm?

181, 281, 285, 77, 180, 280, 380, 480 are all 52mm

 

[Sawdustmaker]

any help differenciating?

 

[Saw Dr.]

Here are my guesses:

Starting at top left:
Two 285/1100/2100 top shrouds
Unknown topcover bottom left

next row over at bottom:
280/380/480 tank/handle

Under flywheels and redneck muffler:
280/380 topcover, 285/1100/2100 air filter lid
Pair of 281 starters

 

[Freehand]

That 56mm jug you have is prolly for the 1100 cd........good stuff though......You'll have yerself a 100cc........

 

[Kennygee]

husky parts

I believe the clutch covers will work on 185 to 2100 and 285.480 298 1100. the mufflers look to be 2100-1100 and maybe 480 .the top covers 2100 for sure and air filter 2100. the 480 used two different fly wheels that I know of . Don't know to much about the others. 2100 's that I have have 3 pawls-480- 2.


If You want to get rid of some of those send me a PM I have some 480 parts and $$ . could use clutch cover and top cover for a 2100.

 

[Vibes]

That Power Kraft looks like Remington PL-5 in Montgomery Wards colors. Cool saw 65cc. Nice crackling sound to them. I'd be interested in it if you're parting with it.

 

[little possum]

So want your investment back?

+s&h

Nice haul there, from a husky guys point of view.

 

[Sawdustmaker]

I believe the clutch covers will work on 185 to 2100 and 285.480 298 1100. the mufflers look to be 2100-1100 and maybe 480 .the top covers 2100 for sure and air filter 2100. the 480 used two different fly wheels that I know of . Don't know to much about the others. 2100 's that I have have 3 pawls-480- 2.


If You want to get rid of some of those send me a PM I have some 480 parts and $$ . could use clutch cover and top cover for a 2100.

thanks, PM me what of it you want.

That Power Kraft looks like Remington PL-5 in Montgomery Wards colors. Cool saw 65cc. Nice crackling sound to them. I'd be interested in it if you're parting with it.

the piston is scored to heck, but if you want her PM me

So want your investment back?

+s&h

Nice haul there, from a husky guys point of view.

more or less. i knew there where prolly parts here some ppl were looking for. prolly going to figure out what the gastanks belong to and ebay them and the recoils.