Does this bar make my saw look big ?

[sawfun]

I seriously think a 661 with a 10 or 12 pin would beat an 026 with both saws running 16- 20 inch bars. Though the big powerhead would certainly not be practicle, just a blast.

 

[cgraham1]

Works on the 660 also View attachment 462033

That's how Dexter Day likes to set up his saws.

 

[Westboastfaller]

I seriously think a 661 with a 10 or 12 pin would beat an 026 with both saws running 16- 20 inch bars. Though the big powerhead would certainly not be practicle, just a blast.

How was a 10 or 12 t in the
equation? In this scenario the little saw was turning more FPM...remember?
wde_1978...I think you spoke to soon
My left eye lid is starting to twitch ...j/k

 

[nk14zp]

If you had a 9 pin, I'd bet it would go pretty fast. Even a 10 maybe with a bar mod.

14

 

[nk14zp]

Works on the 660 also View attachment 462033

Will it cut any better than a mini mac?

 

[jeepyfz450]

I run an 18 tooth but its on a 22 inch bar..... Just need the HP

Sent from my XT1254 using Tapatalk

 

[thomas1]

Will it cut any better than a mini mac?

No, but the 660 will hold a bigger boat.

 

[Deets066]

No, but the 660 will hold a bigger boat.

 

[Deets066]

I seriously think a 661 with a 10 or 12 pin would beat an 026 with both saws running 16- 20 inch bars. Though the big powerhead would certainly not be practicle, just a blast.

I doubt a stock 661 would even come close to runnin a 12 pin.
9 pin and proper chain will load the saw

 

[Gypo Logger]

Try some 404 on that turkey carver Brian.

 

[nk14zp]

No, but the 660 will hold a bigger boat.

QTLA

 

[Trx250r180]

According to this thread's title, I think you should have put that bar on a 441 as they already have a fat bottom. It would be like tight white pants on a 300 +pound gal. Seriously, I bet that chain just cannot get a big enough bite to cut well with that powerhead.

Fat bottom Stihl's they make the picco chain go round ..........♫

 

[tylerbeach3]

I threw my Stihl pole saw bar on my husky this morning just for you guys.

 

[VinceGU05]

My 192t replacement.

 

[tylerbeach3]

Nice, bonsaï pruner. Wait til y'all see my big bar on the pole saw...

 

[Adirondackstihl]

Hey Brian, any issues with running the Picco on a standard 3/8 rim?

 

[Trx250r180]

Hey Brian, any issues with running the Picco on a standard 3/8 rim?

I personally have not, it fits a stihl rim nice,i have not tried others though,some guys insist you need a picco rim ,as much as i use it ,very little ,just fenceposts and carpentry i do not see an issue,wide open on the 440 i heard no binding or skipping noises

 

[TRTermite]

If you had a 9 pin, I'd bet it would go pretty fast. Even a 10 maybe with a bar mod.

No I don't wanna do it but now that the fat is in the fire what kind of bar mod would you be droolin on.

 

[TRTermite]

No I don't wanna do it but now that the fat is in the fire what kind of bar mod would you be droolin on.

Does Oregon Make a 9 Pin Rim ?? This would wake up a sleepy Stihl 056 Mag II (for entertainment) ..

 

[Adirondackstihl]

Does Oregon Make a 9 Pin Rim ?? This would wake up a sleepy Stihl 056 Mag II (for entertainment) ..