moronmountain
ArboristSite Operative
So I've read here whilst doing a search that some peeps don't like to grease the sprockets on their bars. Why is that, and is that really the general consensus?
We all just did this one two three weeks ago.:rolleyes2:
I see nothing around here has changed...
Gary
We all just did this one two three weeks ago.:rolleyes2:
If you stick with Stihl you won't have to worry about it
Why won't Husky make a decent bar that doesn't need to be greased?
That so far is my biggest ##### with the 550 along with having to grease the clutch bearing. Two issues that Stihl does not have
With either brand you don't have to worry about it.
Stick around..there are some "which saw should I buy", "how do I cut this tree", "my saw won't start, and a couple of "is Stihl better than Husky" threads you can help us with.
Might even find an oil thread for ya. :msp_biggrin:
So I don't get why everyone acts like a jerk when you happen to ask a question that's been asked before. If the only purpose of this site was to use "search" and try to find the answer you're looking for, then what is the point of even joining? I mentioned in my first post that I in fact found some comments about greasing sprocket tips, but obviously didn't find an answer that was convincing to me, so I made a post. I'm sure every single possible topic regarding chainsaws has been discussed here at some point in time, and in one way or another. However, even when searching, you don't always find exactly what you're looking for.
For everyone that responded to my question in a positive manner, I thank you. For everyone else that rolled their eyes or otherwise acted like a jerk, don't read my friggin post if you don't want to. The fact that you were part of a previous discussion that I was not involved in doesn't make you superior, cool, tough, or whatever you think you are. If you act like that to people face to face, I can see why you are SO knowledgeable about what goes on here. It's because you don't have any friends in real life, and you have to try and be cool on the webernet.
You need to dial it down a notch. If all you're looking for is "an answer that was convincing to me" you're probably looking for somebody to validate what you've already decided to do. After you've been here awhile you'll realize that that probably isn't a good idea.
You've been asking questions in several threads here and I've read most of them. You've received a wealth of information and the collective knowledge of a lot of very sharp people. People have been, for the most part, polite and generous with their time and their advice.
We were all new at one time or another and we all got razzed a little when we asked questions. You might get kidded a little. Deal with it. Or not. Everything you would ever want to know about saws is available to you here. Use it or don't. Your choice entirely.
Try the Search function, there's a ton of information available there on greasing bar tips. What it comes down to is that some people do and some people don't. It's one of the longest running arguments on AS.
If it makes you feel good to grease your sprocket tip then go ahead. Grease it often if you grease it at all. Or just don't grease it. Most of the guys I work with don't grease.
Chill out, they are just teasing you. There were idd some threads going on about this subject very recently. I've searched one, and it goes under the name "Simple question - chainsaw bar grease gun". The thread derailed a bit and there is more in it about the sprocket tips than the grease gun.
I've seen that Philbert liked a post here but hasn't reacted, but I'm gonna link to his post in the previous thread. He gives good information about a lot of stuff and altough not everybody always agrees, I've find his explainations very useful. Here is the link:
Simple question - chainsaw bar grease gun - post #30
If you read the whole thread, you'll find a lot of information. Like that a bar will probably wear out before the sprocket will. And if you grease, you should grease regularly, if you don't, you don't really have to start.
I don't grease my sprockets, can't do it on my 2 Stihls. Neither do it on my Echo because it doesn't become hot or so. If you grease, I think you should be carefull when grinding the bar edges because the small iron parts (also small debris when cutting) can get stuck in the grease and increase the friction between the sprocket and the bar (imo). I don't grease them and clean my bar with WD-40 after grinding the rails so it's completely clean.
Typhke
I'm chilled. Wasn't in the mood yesterday is all. I apologize for overreacting.
Enter your email address to join: