Conifercaner
ArboristSite Operative
- Joined
- Mar 11, 2009
- Messages
- 194
- Reaction score
- 7
I have been looking at the Makita saws but resale isn't very good, when i come to sell.
At the mo i have a Husky 350, which is a nice saw, just lacking a bit of poke.
I have spoken to a Husky specialist and he says go for the 365 due to the torque, he said the 357 is a high speed cutter/limber!!!! Is this true?
I hope to run a 18 or 20 inch bar.
I had 152, 30 year old conifers to cut down, limb and log.
The biggest was 30 inches across, so far i've done around 25.
The saw needs to be capable of all the jobs, as i will only be using the one saw.
Other than that, any other recommendations please
atvb CC
At the mo i have a Husky 350, which is a nice saw, just lacking a bit of poke.
I have spoken to a Husky specialist and he says go for the 365 due to the torque, he said the 357 is a high speed cutter/limber!!!! Is this true?
I hope to run a 18 or 20 inch bar.
I had 152, 30 year old conifers to cut down, limb and log.
The biggest was 30 inches across, so far i've done around 25.
The saw needs to be capable of all the jobs, as i will only be using the one saw.
Other than that, any other recommendations please
atvb CC