I have a Husky 55 Rancher, 8 years old, used very little pulled it out of storage on the second pull rope stuck, pulled it apart to find the pawls were bent over and pulley worn. I installed a new pulley and pawls, and looking through the vents in the cover the pawls only contact the pulley about an 1/8 of an inch or so. Took the saw to the dealer/shop where I bought it, he had no answers. I'm thinking the pawls should have more contact with the pulley, or the same thing will happen down the road, bent pawls, worn pulley. Has any one came across this problem? Thanks in advance...