calee
ArboristSite Operative
any body out there have experience with the older husky 65?
anybody have a C&P for one?
can you bolt a 77 p&c on a 65?
anybody have a C&P for one?
can you bolt a 77 p&c on a 65?
Husky 65/77
- Thread starter calee
- Start date
Help Support Arborist Forum:
morningman
Addicted to ArboristSite
i think i may have a couple crankcasses maybe even a couple completes wont be able to get back to you until sunday though send me a email with a list of parts or whatever your interested in [email protected]
I have a runner 65 and might sell it.
It's a clean saw, I put a new Husqvarna replacement fuel hose assembly in this week, hose, grommet and filter. I also put in a new recoil cord. I have not cleaned it since I bought it three weeks ago, pulled the muffler, or checked compression, it has all kinds of compression. Old, but in great shape Oregon bar, skipper chain.
It's a clean saw, I put a new Husqvarna replacement fuel hose assembly in this week, hose, grommet and filter. I also put in a new recoil cord. I have not cleaned it since I bought it three weeks ago, pulled the muffler, or checked compression, it has all kinds of compression. Old, but in great shape Oregon bar, skipper chain.
From parts lists, it looks like the 77 has the spark plug pointing up while the 65's plug points aft. The 77 seems to have a shroud on top of the cylinder cover and air filter cover to accommodate the spark plug. So, if you can find a 77 cylinder and piston you might also need to find a 77 air filter cover and cylinder cover. I'm not speaking from experience performing the field mod but from research contemplating one.
pickwood
ArboristSite Operative
I dont think you bolt a 77 on a 65- look on ebay- I have found many parts for my 4 L77s.
photos?
