Hi,
This is my first post.
I have a 2018 Husqvarna 240 xTorq and it is twice now that the fuel becomes contaminated with chain oil.
Before you all chime in, I didn't put chain oil in the wrong tank.
The first time I rinced out the fuel tank and carb. The saw ran fine. After about 20 minutes of running the saw stalled.
The primer pump is hard to push and the fuel tank has chain oil in it.
I'm thinking a cracked case but before I take it all apart I thought I would ask if anyone has seen something like this before.
It's a first for me.
Thanks.
This is my first post.
I have a 2018 Husqvarna 240 xTorq and it is twice now that the fuel becomes contaminated with chain oil.
Before you all chime in, I didn't put chain oil in the wrong tank.
The first time I rinced out the fuel tank and carb. The saw ran fine. After about 20 minutes of running the saw stalled.
The primer pump is hard to push and the fuel tank has chain oil in it.
I'm thinking a cracked case but before I take it all apart I thought I would ask if anyone has seen something like this before.
It's a first for me.
Thanks.