THALL10326
The Champ
Just had this saw come in. Fellow used a impact wrench to remove the clutch. Though this doesn't always happen its a good idea never to use a impact wrench on a chainsaw. Look at his flywheel key, history.
Impact wrenchs are no no for chainsaws
- Thread starter THALL10326
- Start date
Help Support Arborist Forum:
Let me guess, MS180, MS250? I feel a impact is the safest way on these, but the flywheel has to come off first or exactly that will happen. I'll never have another piston stop in a 180 after bending a rod and poking a hole through a piston on a MS180. Mr. Hall, you've had a lot more of these apart than I have. How do you do it?
PA Plumber
Addicted to ArboristSite
Wow.
BTW, did you sell a new saw to this fellow today?
BTW, did you sell a new saw to this fellow today?
THALL10326
The Champ
Beats me. He just said the saw wasn't oiling right so he wanted to check the pump. He said the clutch part broke. I asked how did you take the clutch off. He said impact wrench, I said ut oh and told him why he should never do that. After he left I put the saw on the bench and found out myself what I told him was true..
THALL10326
The Champ
That saw is a 290. Constant slow even pressure is the best way to remove a clutch. No jerking on the ratchet or breaker bar. A steady slow constant power down is the best way to remove a clutch. I've never damaged any saw using that method. The constant slow power down method works best for me with a breaker bar. Any jerking or yanking can cause the piston to pop though I've never busted one using my slow steady method...
THALL10326
The Champ
Naaaaa I'll fix that one, tant no biggie. Price of that flywheel may break his heart but he'll learn from it,LOLOL
You're going about this all wrong...
You should be encouraging everyone to use an impact, the bigger the better...look at the potential for parts and new equipment sales.
See how I keep mine close at hand all the time...
Mark
You should be encouraging everyone to use an impact, the bigger the better...look at the potential for parts and new equipment sales.
See how I keep mine close at hand all the time...
Mark
nmurph
ArboristSite.com Sponsor
are you roping the cylinder?
I use impact wrenches all the time on clutches, never had one break like that.
windthrown
361 Junkie
1127 stamped on the clutch means its a 290/310/390 saw. 250 would be the 1123 stamp. Bigger saw model here. I use a rope piston stop. Keeps the flywheel from shearing. Chances are the guy used a wrench on the flywheel nut to freeze the piston (bad idea) and hammered on the impact wrench. May have forgotten to reverse the wrench on the clutch side.
Last edited:
THALL10326
The Champ
Well like I said they don't always cause damage but man when they do its costly. That key is built into that flywheel, he'll need a new flywheel at the tune of around 90 bucks. I'm sure many have survived a impact wrench but it sure hurts the pocket book when one doesn't....
PA Plumber
Addicted to ArboristSite
Ouch. And a piece of rope goes for about what? Say...30 cents?
To be fair, I've had my share "why did I do that!??!"
windthrown
361 Junkie
Dayum Tommy, you are gonna break his credit card but good! You may even reverse this economic situation in the US with the price of that flywheel and clutch as well. Talk about bailout costs!
FATGUY
Addicted to ArboristSite
:agree2:
I tried to read the series number but couldn't make it out. Anytime the saw has the key molded into the flywheel you definately want to remove it first. The 180 I popped hole in the piston was with a plastic piston stop and a wrench. The one I bent the rod on was a rope and a wrench. I would think the 290 would stand up to it though. I just tore a 029 Super down last night and noticed the aluminum key.
THALL10326
The Champ
Well now the rest of the story as Paul Harvey would say. I asked the man if he had a piston stop, he never heard of such a thing. So I pulled one out my box, explained to him how to use it and to be gentle when applying pressure to removes clutches. He was like wow, thanks. He went to hand me back the piston stop and I said keep it. He like was like thanks man, your alright.
When I fix his old saw up and give him the bill I hope he remembers I'm alright,LOLOL
THALL10326
The Champ
Dayum Tommy, you are gonna break his credit card but good! You may even reverse this economic situation in the US with the price of that flywheel and clutch as well. Talk about bailout costs!
LOLOLOL, cost of ed un ma cation is high man, LOLOL
windthrown
361 Junkie
Reminds me of a sign at the old car repair place in town:
Standard labor per hour: $35
Labor per hour if you tried to fix it: $50
Standard labor per hour: $35
Labor per hour if you tried to fix it: $50
