bryanr2
Addicted to ArboristSite
Has anybody heard from Brad lately?
He's sharpening his saw for Turkey Day.
Has anybody heard from Brad lately?
Alright you smarties, what's the deal with the external transfers? Is it strictly an "ease of manufacturing" or does it have performance benefit?
I suppose that's a possibility. However, the ported topend is significantly stronger on the 2260 than the 555. To me, that proves the performance difference between the two saws.could the fact that the stock 2260 is stronger than the ported 555 be because you didn't strictly adhere to the less is more method? in my experience these saws are very very very very very easily over ported.
Unfortunately, the 2260 is a bogger. It has a lean bog, even with the stock topend on it. Looks like I'll be needing a EL48 and a software update.
Video one is the 2260 with the ported topend off the 555. It has 562 transfer covers, so is effectively a 562 topend.so the top video is a ported 2260 with 2260 topend or 555 topend?
The 555 runs perfectly with no bog of any kind. The 2260 runs stronger, but has the infamous lean bog off idle. You can also here when coming down from WOT. It simply needs more L fuel.So it ran good, now it runs bad?
I'm lost...
Wow, they are really on top of rectifying this problem. What a joke.Unfortunately, the 2260 is a bogger. It has a lean bog, even with the stock topend on it. Looks like I'll be needing a EL48 and a software update.
This is a 2013 saw.Wow, they are really on top of rectifying this problem. What a joke.
The 555 runs perfectly with no bog of any kind. The 2260 runs stronger, but has the infamous lean bog off idle. You can also here when coming down from WOT. It simply needs more L fuel.
What is the capital of Assyria?
Enter your email address to join: