Want to Buy Jonsereds 751

[Cantdog]

Anyone have a junk 751 for parts kicking around?? Long shot but thought I'd ask....

Thanks

 

[Jay Hansen]

What parts do you need? I have one but it has a hole in the oil tank. Also, I'm clear across the country from you, shipping might be pretty dreadful.

 

[Cantdog]

What parts do you need? I have one but it has a hole in the oil tank. Also, I'm clear across the country from you, shipping might be pretty dreadful.

Hey Jay, Thanks for the reply! What I am in most need of is the top handle.....mine is crazy bent so looking for one in a bit better condition. Thanks

Robin

 

[Jay Hansen]

This handle is fairly straight, but I think it's been re-engineered at some point. I can't remember exactly how these are supposed to look, but probably not like this.

 

[Cantdog]

Thanks for the response and the pics. It is in way better shape than mine but has been altered on the clutch side mount. The smaller diameter tube doesn't fit in the case like the original. Which also means it wouldn't fit the clutch cover very well either. That part of mine is about the only part that is not bent!!! Might be able make one out of two with a good welder. As you can see mine is very bent and twisted.

 

[Jay Hansen]

Does the 601 use the same handle?

 

[Cantdog]

Does the 601 use the same handle?

No.....the 601 has a part # of 504 73 07 01 The 751 part # is 504 73 08 01

From the IPL pics it look like the 751 handle has a couple more bends that the 601 doesn't have.

Nice wall of Jonsereds in the background BTW!!!

 

[Jay Hansen]

Thank you! I have a soft spot for the all metal J'reds. I got this old 751 several years back thinking enough parts would eventually show up to make a saw, but it isn't happening. If you don't find a better handle and you want to try to do something with this one, let me know, we can work something out.