Well , i got the used saw that i bought for the build with a 79CC kit....couple of newbie questions.....Took the screw out of the chain brake on both sides, thinking it would be easier to work on...heard the coil spring release a little, and put the links between the spring and the housing in an upward arch....do i need to compress the spring to get the handle back on? Also, watched a video on utube about removing the clutch....left hands treads, and i tapped pretty seriously with a punch in the right direction (CW) with rope in the sparkplug hole, but nothing...not wanting to mess it up i stopped, and here i am...i need to remove the clutch, as the oiler isn't working.....is it possible to blow air through the oiler line, or because of the pump, does that stop it unless it is being driven by the clutch drum? Sorry for the long post, but don't want to tear it up , by trying to fix it! Thanks for any help...rsbhunter