parrisw
Tree Freak
Yup 372 series, best 70cc saw around IMHO! I enjoy the sound of mine. Even with a mostly stock muffler.
MS441 vs MS441/460 vs 372BB
- Thread starter blsnelling
- Start date
Help Support Arborist Forum:
parrisw
Tree Freak
Well, geeze, if your showing yours I might as well show mine! LOL
<object width="640" height="385"><param name="movie" value="http://www.youtube.com/v/fqVqk8GLuDY?fs=1&hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/fqVqk8GLuDY?fs=1&hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>
AUSSIE1
Al.
Yeah I went back and had a listen, that 372BB does sound better than the first two!
parrisw
Tree Freak
Which one?
AUSSIE1
Al.
The 372BB sounds better than the 440/60 and the 441
parrisw
Tree Freak
ahh, yes I agree. That just goes without saying. Stihl's have always had a funny sound to me.
Anthony_Va.
XPW Fan Club
LOL, I know we fought like cats and dogs a couple days ago over something, whatever it was. But I think we see eye 2 eye on this one mang.
I love a 372. One of the funnest saws I've ever ran. As I said earlier, I gotz to have one. The 7900 I would consider 80cc, though it is THE funnest saw I've ever ran. I still liked the feel of the 372 better though.
AUSSIE1
Al.
I swear I said that already on the first page.
I know you did Chuck!
They still don't sound the best but do sound better than the other two!
caotropheus
ArboristSite Operative
Brad,
You did not refer, but from the video I understand you used the same bar width and chain size in all three saws, right?
I can help in this statistical analysis of the data as well. Sax, I agree with you that with a bench dyno and same diameter wood, data could be more uniform with less error due to human factor. Enough someone in measuring cutting time with a chronograph to introduce error. But, in the lack of a bench dyno, you could still make the test by increasing the number of cuts (repetitions) to decrease the influence of error caused by the human operator. Important is to use a uniform diameter wood, and a must to use the same bar size with a new chain for each saw and randomly select the succession of cuts for each saw. Before each cut saws should be weighted and set at the same initial weight, lets say 12 kg for example.
You did not refer, but from the video I understand you used the same bar width and chain size in all three saws, right?
I can help in this statistical analysis of the data as well. Sax, I agree with you that with a bench dyno and same diameter wood, data could be more uniform with less error due to human factor. Enough someone in measuring cutting time with a chronograph to introduce error. But, in the lack of a bench dyno, you could still make the test by increasing the number of cuts (repetitions) to decrease the influence of error caused by the human operator. Important is to use a uniform diameter wood, and a must to use the same bar size with a new chain for each saw and randomly select the succession of cuts for each saw. Before each cut saws should be weighted and set at the same initial weight, lets say 12 kg for example.
Last edited:
Oh boy.
1000+ posts here we come.....
1000+ posts here we come.....
parrisw
Tree Freak
Ya dude I agree. You can't really compare 79cc's to 71cc's. 372 are so awesome. I'm trying to hoard as many as I can.
parrisw
Tree Freak
h aha ha.. So far so good on this thread. Just waiting for 2K to get here, then the **** hits the fan.
Don't forget, the 440s fastest cut time was identical to the fastest of the 372. The 372 has two 3/4" pipes welded in the muffler. The 440 only has the original port opened up. No second port on it:rockn:
Maybe I'll go ahead and sacrifice my 440's muffler to the mod gods tomorrow, and put another port on the flywheel side, mwuuuwahaaaaaa:chainsawguy:
the westspartan
Addicted to ArboristSite
Yo Chucker, while we are talking 70cc saws, I was wondering when you're going to add a full race Husky 570 to your mix? Nobody has that ****!
the westspartan
Addicted to ArboristSite
Hey Brad,
Did you do the same thing to this 441 as you did to mine? Just wondering.
I was using mine today, all day, clearing dead-fall and cutting firewood at Kim's mom's land. I still get a kick out of how strong that thing is for it's size. It really pulls like a much bigger saw and is snappy like a much smaller saw.
could it be that 1 1/2 inches of exhaust port is tooo much B-wamen??
Hey Brad,
Did you do the same thing to this 441 as you did to mine? Just wondering.
I was using mine today, all day, clearing dead-fall and cutting firewood at Kim's mom's land. I still get a kick out of how strong that thing is for it's size. It really pulls like a much bigger saw and is snappy like a much smaller saw.
Everything pretty much identical, except I added a little ignition timing advance to it. The exhaust and transfers are about 3° lower on this saw, just factory differences. I didn't raise it to gain RPMs and risk loosing torque. It's a work saw way before it's a race saw.
I like to keep my muffler mods clean and stock look as much as possible. I can get quite a lot of exhaust area by enlarging some factory exits and simply extending the deflector. I've done that to both the 440 and 441. I may still go ahead and another port though.
I have to agree with ya there 372's sound good...but a nice ported 385 sounds better....nothin like sound of a 385 with a 2ft bar flyin around the base of a tree...395's have a sound of their own....and a great sound at that.....now a 288xp with a jungle muffler sounds awesome as well...
