Split Second Log Splitter
Lets get back to the handle adjustment nuts, it does matter how they are configured. First they should not be tightened down against the handle, they should have some distance to allow the engagement rod to move freely in its slot.
But they are configured in one of two ways:
1- so that when you pull up the handle, it stays up by itself to do the split and automatically returns.
2- so that when you pull up the handle, it drops back down as soon as you let go, for safety.
This adjustment is very fine, only a turn of the lower or upper nut will show you this. Once you have done it you will understand how to utilize this feature. Ours is defaulted to #2 for safety until you understand how to operate and adjust your equipment.
Your friends from Split Second!