Original chain on Dolmar PS401?

[Hoosier]

I used the hell outa the original chain and it cut like butta and held an edge and took an edge for a good while. I got some "oregon" chain that looks the same, but dulls fast and wears me out.

I want my lightsaber back, what do I want to buy for my lil saw to cut maple and other midwest trees...???

 

[cuttinscott]

Stock Dolmar Chain is Dolmar 092 series which is equal to Oregon 91SG. What # oregon did you buy for a replacement?
I would recommend Oregon 91VS or the new blued cutter 91VX non safety chain if you are looking for a better cut.

Scott

 

[SawTroll]

...or you can try Stihl 63PM (by all means not PM1).

 

[Hoosier]

Thanks for the advice, the stock chain seemed to be harder and more durable then the Oregon chain.. Again, it looks identical, but I question the hardness of the cutters at this point.

I will give the stihl a go.
Thanks again

 

[Edge & Engine]

The stock chain is Oregon chain (DOLMAR branded).

 

[SawTroll]

The stock chain is Oregon chain (DOLMAR branded).

Sure it is......


Maybe his new chain is one of the fake "Oregons" sold on the net, or maybe they had a bad lot of steel?????