Adirondackstihl
Flyz, Fuel & Fotos
I'll tell you what this thread has done......
From an outsider looking in, it has made me question your credibility @redbull660
From an outsider looking in, it has made me question your credibility @redbull660
2nd best answerJust going to say my peace and exit this thread, all builders make some saws stronger and faster then others, ask any of them, if they built 10 of the same saw, you always have 1 a little better and 1 a little worse, can't you guys stop with the BASHING and move on, if a owner isn't happy with his saw, then HE should grow a pair and talk with the builder about it, another guys saw being 5% faster is not a fair reason in my opinion, if owner still isn't happy then sell the saw and get 1 done by another builder, just my 2 cents, this is the reason AS has gone down hill, I am done with this.
But you did post Scott's saw.sure no problem. it's simple.
saw owner said jms was constantly saying how his 661s blow the doors off brad's 661s. I was like ok. well I have a bs661. saw owner and I were both like well let's find out. I ran the test and posted the results. from there jms threatened my life and scotts.
if I had an agenda or wanted to start something I would of started the thread with a jms saw vs scott's saw. fwiw I ran scott's saw too and it beat both saws. But I didn't post that! did I!!!
20" Tsumura/Total lite - 9pin rim sprocket
20" Stihl RS chain - .050 3/8 72dl
Pine and maple
Tree Monkey 661 - pine 3.35 sec avg, maple - 9.78 sec avg
JMS Saws 661 - pine 3.76 sec avg, maple - 11.31 sec avg
i have not posted any pictures
But you did run Scott's saw.
sure no problem. it's simple.
saw owner said jms was constantly saying how his 661s blow the doors off brad's 661s. I was like ok. well I have a bs661. saw owner and I were both like well let's find out. I ran the test and posted the results. from there jms threatened my life and scotts.
if I had an agenda or wanted to start something I would of started the thread with a jms saw vs scott's saw. fwiw I ran scott's saw too and it beat both saws. But I didn't post that! did I!!!
I wasn't blaming you Julian.
I actually think it's great if someone has a problem with someone, tries to work it out, and then shares their experience for us.
My problem is this, I have heard a lot of stuff about Jason, and I've asked a lot of people questions. Most of the rumors ive heard have been denied or proved false. I have been unable to get any solid evidence that warrants how he has been treated. I'm not saying it's not there, just that I've tried, and got nowhere. So I'm still unclear what to think.
I certainly don't condone his threatening others, but put yourself in his shoes for a moment, and I think all of you can understand his anger.
If this is going to continue than people need to grow some balls like Ryan, and share there story. Or else leave him alone.
None of this even matters.
Apparently it's brads fault anyhow.
Sent from my iPhone using Tapatalk
sure no problem. it's simple.
saw owner said jms was constantly saying how his 661s blow the doors off brad's 661s. I was like ok. well I have a bs661. saw owner and I were both like well let's find out. I ran the test and posted the results. from there jms threatened my life and scotts.
if I had an agenda or wanted to start something I would of started the thread with a jms saw vs scott's saw. fwiw I ran scott's saw too and it beat both saws. But I didn't post that! did I!!!
sure no problem. it's simple.
saw owner said jms was constantly saying how his 661s blow the doors off brad's 661s. I was like ok. well I have a bs661. saw owner and I were both like well let's find out. I ran the test and posted the results. from there jms threatened my life and scotts.
if I had an agenda or wanted to start something I would of started the thread with a jms saw vs scott's saw. fwiw I ran scott's saw too and it beat both saws. But I didn't post that! did I!!!
But you did post Scott's saw.
I guess no one wanted to believe me when I called the tree monkey army out originally.
How so ? Back up what you sayYour comprehension level needs help.
So this has nothing to do with Jason not selling you a very good top end a while back, & selling it to someone else instead?
I'll ask again,
Who is the owner?
Is that the guy in the screen shot I just shared again?
If it is,
The post Dustin just made is spot on, & this Thread was started as a bash session.
Don't give us the B.S. About a TM vs JMS saw Comparison being 1 sided, but a BS vs JMS comparison somehow is far: you own a BS661.
If those people you mentioned in the PMs about being done wrong, then where are they?
Jeremy is right: this is starting to stink, & not towards Jason.
Which 661 Porter are you going to Bash next?
I believe Jason brought me into this, not me.
Jason felt compelled to post a pic of my port work first, I just returned the favor.
I've tried to help Jason in the past, but one can not help one that refuses to be helped
I believe Jason brought me into this, not me.
Jason felt compelled to post a pic of my port work first, I just returned the favor.
I've tried to help Jason in the past, but one can not help one that refuses to be helped
Is that what he told you. lol yeah whatever. Man can he twist ****. Truth is he tried to sell one to me the other day. I told him to name his price. He wouldn't. I said well you gotta name your price man. I said 165 shipped. He wouldn't confirm that. I said scott was super particular about measuring the jug. Send the jug. Scott will measure it. If he wants it I pay you. If he doesn't I send it back and will pay your shipping costs. He would have none of that.
oh and the jug before that he wanted 300 for that one. I said 165 or 175 was as high as I would go.
66 special unicorn jug whatever - yeah if I can find one sure fine. If not I don't really care cuz it'll never out do the 661s scott does.
owner - none of your fcking biz. if he wants to chime in he can.
I didn't mention anyone in PM. Nice try.
Make it into something it's not. redirect. deflect blah blah.
Enter your email address to join: