WoodAbuser
aka WoodchuckAbuser
Not so sure about that. Ain't no pedals/chain/sprockets on that bike.He can't wait to post a picture of it on the Amish forum .
Not so sure about that. Ain't no pedals/chain/sprockets on that bike.He can't wait to post a picture of it on the Amish forum .
I'm thinking @Backyard Lumberjack out on one of his bike rides and found a scrounge " down the street ".Here you go, it's obvious the guy riding this whatever the heck it is is overloaded, who gets that smiley about riding something like that . Then again, I guess it's better than walking!
View attachment 1050252
I second this motion. Hand and foot controls just suck.Kid; another thing I would look for, and this is coming from running pretty much every brand and set up of machine in the skidsteer world, would be pilot controls. Second choice would be foot controls, but the ones set up with twin stick steering and stick controls for the bucket are a pain to operation smoothly.
This is exactly why it takes my uncle and dad 2 days to do a job that should take 6 hours. Low speed operators. Yep the 310 will never wear out, but I'll be dead before they finish anything.2 trips and trailer brakes I guess?
I'm gonna get flamed hard right now but, Imma big boy, i can take it.
HP and speed are WAAAAAY overrated. I've made money far sooner reaching my ROI sooner than others, because I made do with what I had. I've owned the 100hp ASV, sold with the company, needed less than half the HP to get the same work done, so I wasted the purchase price, and continued to hurt the ROI, every time I put diesel in it. More HP more operating costs.
I've said it before, I am lazy. But I am also not afraid and have always had the resources to go buy something I want. Even with those two attributes, its because I made informed decisons and was rational about filling the need without over compensating...... I had the RC 100 specifically to move Granite boulders on a beach I couldn't get permitted to build a concrete seawall to protrect the upland Condo. so a sloped rock revetment was all I could do, and the granite as you know, is quite heavy and had to be for a high energy beach. I rented a Cat 924 for the higher placings, but the ASV laid alot of bedding stone in graduated sizes first, and even tooled in the lower rows until I ran out of reach.
NOT MY PICTURE OR MY WORK, I'd have to search a few ext HD's find any of mine, but similiar. OTR dump trucks could get down the beach at low tide and drop rocks within 50' so an excavator wasn't "mobile" enough, I had to have all equipment off the beach at night and leavfe no stockpile in the intertidal area, being a fouor mile drive tot he beach ramp each night, I wasn't walking and excavator thaty far either.
View attachment 1050184
Till he wants to use a mulcher...Ok that opens up the realm of machines that will do the job you want since you don't really need high flow.
Wow that's clean. Don't see them like that around hereI know its been asked a few time.
Finally got the suburban running today after a full engine rebuild.
View attachment 1050265
I suspect the AV might fail as soon as you try to pick that bar up with the saw handles lol.Buy this one!!!View attachment 1050250View attachment 1050251Because ain't no tree to tall and ain't no tree to small! Especially when the only good tree is a frick'n STUMP!!!
Here you go, it's obvious the guy riding this whatever the heck it is is overloaded, who gets that smiley about riding something like that . Then again, I guess it's better than walking!
View attachment 1050252
What kind of arborist helmet is he wearing, is that feltJudging by his smile, he sure is feeling gay about his wood.
Looks like he felt good wearing it or maybe he just got good wood.What kind of arborist helmet is he wearing, is that felt
All he is missing is the lederhosenLooks like he felt good wearing it or maybe he just got good wood.
That's for later...All he is missing is the lederhosen
and some marbles?All he is missing is the lederhosen
Looks to be a serious scrounger.
Or like butter when you get the hang of itKid; another thing I would look for, and this is coming from running pretty much every brand and set up of machine in the skidsteer world, would be pilot controls. Second choice would be foot controls, but the ones set up with twin stick steering and stick controls for the bucket are a pain to operation smoothly.
A gob cut is UK slang for the face cut. A 'gob' is a mouth...for example, you might say,Mind blowing that there wasn't even a traffic control flagger or someone along those lines? Scary stuff indeed!
P.S. What's a gob?
20 pages behind did you see cowboy?@
A gob cut is UK slang for the face cut. A 'gob' is a mouth...for example, you might say,
'that londonneil is a right gobby sh***!' meaning mouthy git. I guess a face cut looks a bit like a mouth or smile.
Mild winter here too. I reckon 20 Jan is half way through a normal winter in terms of consumption and I'm 10-20% light
Jeez, 20+ pages behind again!
Enter your email address to join: