Banguts
ArboristSite Member
Oh, and, yeah.. Nevada City, which is in Nevada County.. which is in... you guessed it: California
Sent from my SM-J320V using Tapatalk
Sent from my SM-J320V using Tapatalk
From what I understand is if you grow those flowers and then smoke it you will not want to go out and cut any logs into firewood, but maybe that is just my problem.
I bought a brand new car a few years ago with a small 4 cylinder engine for economy travel. It started jerking at 20,000 miles. The dealer said it was probably just a spark plug so it would not be covered under warranty so changed the spark plugs and it still continued to jerk. The dealer said if the engine light was not on there was nothing they would to fix the problem unless I paid them to check it over. When I was out of town the engine light came on and I plugged my scanner into it and discovered one cylinder was misfiring so the closest dealer said they were busy and needed a few days to set an appointment. After some investigation decided to change the ignition coils and it ran smooth. From my point of view if you want something fixed then go ahead and fix it yourself. I spent more than 30 hours going to the dealer to get my car fixed and still they did not fix any of my problems. My car has more than 60,000 miles on it now and have done some maintenance that has cost me more than 6 hours labor, but has saved me at least 15 hours of driving to the dealer to get the run around.
As far as sharpening your chains anybody can learn to sharpen chains if they want to, but if some body wants to drive to a saw shop to get their saw sharp then that will keep saw shops in business. It would take me nearly the whole day to drive to a saw shop to tell me that I could pick up my chains in a few days. Not acceptable. Thanks
I bought an Echo CS-620P today and since my last saw used 5/32" files, I asked for some 7/32" files. The guy said "I'm out but I can sell you some 5/32" files." I said "you can't use these on this chain." He mumbled under his breath, "You can if you know what you're doing." I would have left the saw there if it weren't for the 20% off due to their "Open House".
Some people are good at what they do, but not necessarily good teachers. I've also met some guys who are very protective of their 'secrets'.My neighbor is pretty knowledgeable . . . We used to butt heads because he would want to just fix the problem . .
Just curious, what is your job/title there?I have said it a few times already. You need to find a new dealer. I only need to have bad service 1 time and I am gone. Also I look at it a little different. When I was a kid my dad would go to the local mechanic for a coffee and have him look over the car while he was there. He caught little problems well before they were big ones. Often my dad would say oh yes the car runs great but from time to time there is a little vibration... It works the same way at my dealership. The customer can come in and drop off a chain but then also ask questions. I can tell them about flipping the bars, show them how to clean out the bar grooves etc.. I am one of the few people I know who still does my own oil changes. I still smile when people walk around the sales floor like kids in a candy store, looking at the latest and greatest.... can't do that sitting in the garage.
I stopped by my old Partner dealer today now Stihl, asked if he had a 5/32nds file,... he said how many ? I said 2 he said $4.00 I said thanks and was gone with the 2 new files.Oregon low profile and narrow kerf (Type 90) chain actually calls for a 4.5mm ( 11/64") file. This is counter-intuitive, since this chain appears to be slightly 'smaller' than regular 3/8 low profile chain (Type 91), which takes a 5/32" diameter file.
But I tried it, and it really worked well. Oregon says the teeth have s different profile. You might have to order these files, unless a well stocked store carries them..
Philbert
Just curious, what is your job/title there?
1 complaint and you are gone?
Some people are good at what they do, but not necessarily good teachers. I've also met some guys who are very protective of their 'secrets'.
Philbert
I am a CBN user, thank you for bringing that up....I kept the cleaning sticks they sent me....I haven't done but 15-30 chains with them yet.....how many chains on average would you say it takes to clog them up....I understand there are a lot of variables, just wonder how long it takes to clog one???I have one thing to add for CBN folks........dress the wheel.
The wheels come with a dressing stick for a reason.
Will a CBN wheel cut when loaded? Yup
Will it heat a cutter when loaded? A lot better than a standard wheel!!!
If it isn't a flat non reflective surface......it's got steel in the surface
And it is not cutting as well ........
This isn't theory .......it's physics. Plain and simple.
I'm an Ol Phart......but in right.
If you need help finding a dressing wheel......PM me.
Never used an ultrasonic cleaner.....seems a pain to die mount and remount it. But hey.....if you like it ...great.For cleaning CBN wheels a sonic cleaner works very good
Better than the stick
When using the white stick the wheel should be spinning or coasting to a stop
Sent from my iPhone using Tapatalk
Lol....I never keep track.I am a CBN user, thank you for bringing that up....I kept the cleaning sticks they sent me....I haven't done but 15-30 chains with them yet.....how many chains on average would you say it takes to clog them up....I understand there are a lot of variables, just wonder how long it takes to clog one???
LOL, that's why I said "there are many variables".....I can't imagine there is anyone that keeps track of the excact number of chains they do, I know I don't have time for it.......the way you talked i figured you had a tip or trick regarding the CBN wheels.....if someone has to actually burn a tooth to be able to tell something is wrong, they haven't ground that many chains!!!Lol....I never keep track.
Each chain is different as to length and amount taken off and size.
You can feel it.......and see the color of the tooth.
And look at the wheel......anything but dust brown is steel building heat and loading the wheel.
You can load a wheel to the point dressing sticks wont work.
That would get you moved out of the grinding department.
If too loaded they can be redressed on a surface grinder.
But you lose your profile.....the wheel is actually made smaller.
In real world grinding you make the wheel round and concentric to the taper of the mandrel.......another world.
Anyway........I just go by looks mainly.
But a CBN wheel can build heat better than s cheap wheel.
On my Silvey 600 with 8" wheel I have a brush with a drip to keep it wet. VERY little water or you get a shower.
I don't reverse wheel either. Hate me if you will. Lol
To be honest it is by tone more than anything.LOL, that's why I said "there are many variables".....I can't imagine there is anyone that keeps track of the excact number of chains they do, I know I don't have time for it.......the way you talked i figured you had a tip or trick regarding the CBN wheels.....if someone has to actually burn a tooth to be able to tell something is wrong, they haven't ground that many chains!!!
Now it would be helpful to people if you would share "how" you actually dress the CBN wheel....I know some guys say they let it slow down and just barely hit the stone to the wheel....
Enter your email address to join: