highpower
ArboristSite Member
I inherited this saw a couple years ago. It was in great shape, just wouldn't start. Long story short, I took it to a local shop and he put a new electronic ignition in and it ran great until a wire broke loose and stuck out the back by the kill switch. I took it back and he had it fixed the next day. Now the wire is sticking out the back of the saw and it wont start again. I can't figure out where the wire goes. The kill switch single pole and one wire and the wire that is still attached appears to be grounded to the coil. Do both wires connect to the switch?
Thanks
Thanks