I got the Tech Tac - nice little device - thank you to those who have mentioned it in other threads so I could find it.
I ran the saw and I get 13K RPM warmed up, top end. I'll check it again after the next good work out when 'hot'. Cold it's at 3K RPM idle - but I'm not going to fool with it.
The book says it hits max HP at 9.5K RPM - so it looks like the saw is happily rich and acceleration/throttle response is excellent.
Unless someone has a reason that I should change it - it's going to stay this way until 10 tanks of fuel and I'll give it a final tweaking.
I'm also running the Amsoil Mix Oil at 43:1 (3oz/1Gal)
I ran the saw and I get 13K RPM warmed up, top end. I'll check it again after the next good work out when 'hot'. Cold it's at 3K RPM idle - but I'm not going to fool with it.
The book says it hits max HP at 9.5K RPM - so it looks like the saw is happily rich and acceleration/throttle response is excellent.
Unless someone has a reason that I should change it - it's going to stay this way until 10 tanks of fuel and I'll give it a final tweaking.
I'm also running the Amsoil Mix Oil at 43:1 (3oz/1Gal)